Cisco 8201 Manual

Hide thumbs Also See for 8201:

Download this manual

Replace Chassis Components

•

Replace Fan Modules for Cisco 8201 Routers

The fan module is designed to be removed and replaced while the system is operating without presenting an

electrical hazard or damage to the system. Please keep the replacement fan modules ready prior to attempting

this task.

Note

The routers support FAN-1RU-PI (port-side intake airflow) and FAN-1RU-PE (port-side exhaust airflow)

fan modules.

Note

The airflow direction must be the same for all power supply and fan modules in the chassis.

Step 1

To remove a fan module, follow these steps:

a) Press two latches on the fan module and grasp the handle of fan module.

Replace Fan Modules for Cisco 8201 Routers, on page 1

Replace Power Supply, on page 3

Replace Chassis Components

Page 1 Replace Chassis Components • Replace Fan Modules for Cisco 8201 Routers, on page 1 • Replace Power Supply, on page 3 Replace Fan Modules for Cisco 8201 Routers The fan module is designed to be removed and replaced while the system is operating without presenting an electrical hazard or damage to the system.
Page 2 Replace Chassis Components Replace Fan Modules for Cisco 8201 Routers Figure 1: Cisco 8201 Router Remove Fans Latched fan module b) As you simultaneously press the latches pull the fan module fully out of the chassis. Step 2 To install a fan module, follow these steps: a) Hold the fan module with the LED at the top.
Page 3 Replace Chassis Components Replace Power Supply If the fan module does not go all the way into the slot, do not force it. Remove the fan module and verify Note that it is the correct type for your router and in the correct orientation. To verify the status of fans and the speed, use the show environment fan command.
Page 4 Replace Chassis Components Replace Power Supply Figure 2: Cisco 8201 Router Remove Power Supply Power supply Replace Chassis Components...