Page 40
Wrap all refrigerant piping, including field-provided isolation ball valves and flexible pipe connection kits provided by LG. Glue all insulation joints with no air gaps between insulation segments, and between insulation segments and the unit case. Ensure insulation material fits snugly against the refrigeration pipe with no air space between the pipe surface and the surrounding insulation.
Page 49
Wiring must comply with all applicable local and national codes. • If using LG supplied cable and the length needs to be extended, the LG Extension Kit (sold separately) must be used. A maximum of four (4) kits (up to 165 feet) can be used.
Page 64
(4) to five (5) feet above the finished floor. • It may be necessary to use a handy box that is sized in metric units, depending on the sensor model. Check with your LG representative to verify which size of handy box is needed for the sensor in question.
(see table). LG VRF systems can operate with both old 2A heat recovery units and new 3A heat recovery units if the outdoor unit software has been upgraded. If a system includes a mix of both old and new heat recovery units, system design must follow 2A heat recovery unit series piping rules.
Page 66
The method and configuration of controlling indoor units will vary according to system requirements, and the indoor unit(s) installed. The next few pages show examples of typical control configurations. Some configurations require LG group control kits and cables (sold separately);...
Page 73
LG Electronics, U.S.A., Inc. Air Conditioning Technologies IM_MultiV_CeilingCassette_IDU_11_19 4300 North Point Parkway Supersedes: IM_MultiV_CeilingCassette_IDU_9_16 IM_MultiV_CeilingCassette_IDU_2_16 Alpharetta, Georgia 30022 IM-MultiV-IV-CeilingCassette-01-15 www.lghvac.com...