Advertisement
Quick Links
Rear Discharge Completion Kit
Base 72in Mower for Groundsmaster
Model No. 30549
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
1
Preparing the Machine
No Parts Required
Preparing the Machine
1.
Park the machine on a level surface.
2.
Shift to the N
EUTRAL
3.
Lower all attachments (if equipped).
4.
Engage the parking brake.
5.
Shut off the engine and remove the key.
6.
Disconnect the battery; refer to your machine
Operator's Manual.
© 2020—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Description
No parts required
Carriage bolt (5/16 x 3/4 inch)
Flange nut (5/16 inch)
Left baffle
Center baffle
Right baffle
Rear shield
Blade
Anti-scalp cup
Blade bolt
position.
Register at www.Toro.com.
Form No. 3438-876 Rev A
®
360 Multi-Purpose Machine
Installation Instructions
Qty.
–
Prepare the machine.
26
26
1
1
1
Install the baffles.
1
3
3
3
Original Instructions (EN)
All Rights Reserved *3438-876* A
Printed in the USA
Use
Advertisement
Related Manuals for Toro 30549
Summary of Contents for Toro 30549
- Page 1 Form No. 3438-876 Rev A Rear Discharge Completion Kit Base 72in Mower for Groundsmaster ® 360 Multi-Purpose Machine Model No. 30549 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Qty.
- Page 2 Installing the Baffles Parts needed for this procedure: Carriage bolt (5/16 x 3/4 inch) Flange nut (5/16 inch) Left baffle Center baffle Right baffle Rear shield Blade Anti-scalp cup Blade bolt Procedure DANGER Mechanical or hydraulic jacks may fail to support the machine and cause a serious injury.
- Page 3 g318353 Figure 1 1. Flange nut (5/16 inch) 4. Decal 7. Right baffle 2. Rear shield 5. Left baffle 3. Carriage bolt (5/16 x 3/4 inch) 6. Center baffle...
- Page 4 Install the blades, anti-scalp cups, and blade bolts (Figure 2). Tighten the blade bolts to 115 to 149 N·m (85 to 110 ft-lb). Important: Ensure the curved part of the blade is pointing toward the inside of the mower deck. g004741 Figure 2 1.