Advertisement
Safety Information
Before using the device, read these precautions carefully. Follow these precautions and
instructions to ensure optimal product performance and to avoid danger and legal or
regulatory violations.
Fire-proof Precautions
Keep the device away from fire or heat sources, including electric heaters, ovens,
stoves, and candles. Otherwise, the shell of the device may become hot or melt,
causing fire in extreme cases.
Replace deteriorated cables or power socket components on the power supply line or
near the device in a timely manner to eliminate safety risks.
Potentially Explosive Area
Do not place or operate the device in an environment with that contains flammable or
explosive gas or smoke.
Do not place flammable or explosive materials below or above the meter cabinet.
General Safety Precautions
Do not lead the strength member of the optical fiber or other metal parts indoors. Do not
install telephone lines, network cables, power adapters or power adapter cables
outdoors. These measures will help to prevent damage to the device and injury to
people, which are especially possible during thunderstorms.
If the power adapter is damaged from human factors, and the inside circuit is exposed,
do not touch the exposed parts. Otherwise, security risks are present.
Keep the device out of the reach of children. Components and accessories are small
and could pose a choking risk.
Looking directly at the optical port may injure your eyes.
Do not use any power adapters that are not in the standard configuration. Otherwise,
the device may be abnormal or unsafe.
If a backup power unit (BBU) is available in the packing box, do not disassemble it, refit
it, or put it in a fire. Otherwise, it may create a safety risk.
Instructions for Use
Use the device in a clean and well-ventilated indoor environment, out of direct sunlight.
Store devices and accessories in temperature –10° C to +35° C and relative humidity
30%–85% RH for at most 9 months. If the ambient temperature or relative humidity is
overhigh or overlow, the device may be faulty.
Install the device in strict compliance with the requirements of the supplier. Ensure there
is at least 10 cm space surrounding the device for heat dissipation. During installation,
keep the device away from flammable objects and electric appliances that generate
strong magnetic or electric fields, including microwave ovens, refrigerators, and mobile
phones.
The described input voltage range should comply with the local power grid. For
example, the input voltage of the device is 200–240 V AC for European Union; the input
voltage of the device is 100–130 V AC for the United States of America.
ONT Quick Start
1
Advertisement
Table of Contents
Related Manuals for Huawei EG8040 Series
Summary of Contents for Huawei EG8040 Series
- Page 1 ONT Quick Start Safety Information Before using the device, read these precautions carefully. Follow these precautions and instructions to ensure optimal product performance and to avoid danger and legal or regulatory violations. Fire-proof Precautions Keep the device away from fire or heat sources, including electric heaters, ovens, stoves, and candles.
- Page 2 The power supply voltage of the device must meet the requirements on the input voltage of the device. Before use the power adapter, please check no damage on the adapter. Use dry hands to connect or disconnect cables. Stop using the device and switch off the power before connecting or disconnecting cables.
-
Page 3: Product Overview
The devices that support Wi-Fi access are classified into devices equipped with external antennas and devices equipped with internal antennas. If some device types are not in the preceding list, refer to http://www.huawei.com. Technical Specifications Power adapter input: 100–240 V AC, 50/60 Hz ... - Page 4 Weight Maximum System Power GPON Terminal (Including the Power Adapter) Consumption EG8040 series About 400 g 7.5 W EG8141 series About 250 g 7.15 W EG8145 series About 250 g 18 W EG8240 series About 400 g 7.8 W EG8242 series...
- Page 5 Mounting a GPON terminal onto the wall (Only supported by some product models) Mark the positions of two holes used for mounting a GPON terminal, ensure that Step 1 the two holes have the same spacing as the two mounting holes. Select a proper drill according to the outer diameter of the screws.
-
Page 6: Connecting Cables
1. When installing ONTs placed horizontally against the wall, you are advised to leave the heads of the screws 3 mm over the wall. When installing ONTs placed vertically against the wall, you are advised to leave the heads of the screws 8 mm over the wall. 2. - Page 7 USB storage device Wi-Fi terminal 1. Power switch 2. Power port 3. POTS port 4. Ethernet port 5. CATV port 6. Reset 7. USB port 8. WPS switch 9. WLAN switch Optical port Logging in to the Web Configuration Window Set the IP address of the PC in the same subnet as the management IP Step 1 address of the PON terminal.
- Page 8 Shipped from different manufacture batches, the nameplates of some devices do not have the IP address, user name, and password printed. In such a case, log in to the device using 192.168.18.1, Epuser (user name), and userEp (password). If you do not perform any operations after logging in to the system for five minutes, you will exit the system and the system automatically returns to the login interface.
-
Page 9: Disposal And Recycling Information
4. When connecting ONT to a wireless network, keep it far from the following devices: Electronic devices or components that produce RF noises (keep a distance of more than 2 meters between such a device and ONT.) 2.4 GHz wireless mobile phones or X-10 devices (such as microwave ovens, home security systems, blue-tooth devices, and refrigerators) that greatly weaken or even eliminate radio signals. -
Page 10: Indicator Description
Indicator Description Indicator status description 1 Table 1-1 Indicator Status Description The CATV function is enabled and CATV signals are Always on received. CATV The CATV function is disabled or CATV signals are not received. Steady on The WPS function is enabled. Blinking A Wi-Fi terminal is accessing the system. - Page 11 Indicator status description 2 Table 1-2 Status Description Status The PON terminal is prohibited by the upper-layer device or the optical power is Blinks twice Blinks twice abnormal. Contact the service provider for a second a second help. Blinks twice The PON terminal attempts to set up a a second connection with its upper-layer device.
- Page 12 Copyright © Huawei Technologies Co., Ltd. 2018. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Issue: 03 BOM number: 31509010...
-
Page 13: Warranty Card
Warranty Card Thank you for choosing Huawei Technologies Co., Ltd. To get better services, please read this warranty card carefully, fill in the required information, and preserve this card in good condition. User Information Personal or Company's full name: Address/Postal Code:... -
Page 14: Limited Warranty
In any case that is not covered by this limited warranty or should the warranty expire, Huawei shall charge for the service(s) claimed for the products if the product is still remediable. Huawei reserves all rights to interpret this limited warranty.