Advertisement
Quick Links
Ref No.: F00693-EN-4.00
Date: June 6, 2016
Approved by: Tashiro Masaaki
Revised: The procedure for replacing the intermediate guide assembly is added to the service work
Model:
imageRUNNER ADVANCE C3320i
imageRUNNER ADVANCE C3320
imageRUNNER ADVANCE C3320L
imageRUNNER ADVANCE C3325
imageRUNNER ADVANCE C3325i
imageRUNNER ADVANCE C3330
imageRUNNER ADVANCE C3330i
Subject:
Measures against the transfer cleaner failure, abnormal sounds and stained images
[Detail]
An abnormal sounds or toner leakage from the transfer cleaner may occur because the waste toner gear holder has fallen. This
notice is to inform of the measure to handle the situation.
[Service work]
When an abnormal
noise or toner leakage from the transfer cleaner has occurred, make sure if the waste toner gear holder has not come off. If the
holder comes off, attach it to the proper position again.
Fig. [A] shows the normal state of waste toner gear holder, and Fig. [B] shows the coming off state of waste toner gear holder.
In the normal state of waste toner gear holder [A], the boss fits into the mounting hole [a]. Also the side of waste toner gear holder
and the flat surface of mounting part are set parallel to each other [b].
In the coming off state of waste toner gear holder [B], the boss does not fit into the mounting hole [c]. Also the side of waste toner
gear holder and the flat surface of mounting part are not set parallel to each other [d].
Service Information
Office Imaging Products Quality Assurance Center
1 of 6
Copier Color
Hardware
Advertisement
Related Manuals for Canon imageRUNNER ADVANCE C3320i
Summary of Contents for Canon imageRUNNER ADVANCE C3320i
-
Page 1: Service Information
Ref No.: F00693-EN-4.00 Date: June 6, 2016 Approved by: Tashiro Masaaki Revised: The procedure for replacing the intermediate guide assembly is added to the service work Model: imageRUNNER ADVANCE C3320i imageRUNNER ADVANCE C3320 imageRUNNER ADVANCE C3320L imageRUNNER ADVANCE C3325 imageRUNNER ADVANCE C3325i... - Page 2 F00693-EN-4.00 Check not only visually but also by grasping the waste toner gear holder to confirm that it does not rattle. Install the removed waste toner gear holder as follows: 1) Insert the boss[a] on the upper part of the waste toner gear holder into the mounting hole[A] of the main unit, and fix the claw[b] by hooking it on the edge of the plate[B].
- Page 3 F00693-EN-4.00 3) Check that the above-mentioned three bosses and claws are fitted normally and the side of the waste toner gear holder and the flat surface of the mounting part are set parallel to each other. If needed, replace with the new type intermediate guide assembly (FM1-D186-010) and the waste toner gear holder (FM1- D187-010) whose shapes are changed so that the waste toner gear holder would not come off easily.
- Page 4 F00693-EN-4.00 [CAUTION] When installing the links of the Bottle Motor, be sure to pinch the Lock Arm [1]. 13) Remove the Front Inner Upper Cover [1]. - 2 Screws [2] - 1 Connector [3] - 3 Wire Saddles [4] 14) Remove the Front Inner Lower Cover [1]. - 4 Screws [2] 4 of 6...
- Page 5 F00693-EN-4.00 15) Remove the Intermediate Guide [1]. - 1 Screw [2] - 1 Hook [3] [Service parts] Part Number Description Q'ty Fig.No. FM1-D186-000 INTERMEDIATE GUIDE ASSEMBLY 1->0 102A FM1-D186-010 INTERMEDIATE GUIDE ASSEMBLY 0->1 FM1-D187-000 WASTE TONER GEAR HOLDER ASS'Y 1->0 102A FM1-D187-010 WASTE TONER GEAR HOLDER ASS'Y...
- Page 6 F00693-EN-4.00 iR-ADV C3330i EUR 230V QTF05191 iR-ADV C3325i EUR 230V QTS10220 iR-ADV C3320i EUR 230V QTT09627 iR-ADV C3320 EUR 230V QTU00964 iR-ADV C3330 AS 230V QTZ01584 iR-ADV C3325 AS 230V QUB01102 iR-ADV C3320 AS 230V QUC02326 iR-ADV C3330 IND 230V RJS00563 iR-ADV C3325 IND 230V RJU00582...