Preface About this Manual This manual is designed to assist you in using your new digital camera. All information presented is as accurate as possible but is subject to change without notice. Copyright This manual contains proprietary information protected by copyright. All rights are reserved.
ii Preface Trademark Recognition Windows 98/2000/ME/XP are registered trademarks of Microsoft Corporation in the United States and/or other countries. Windows is an abbreviated term referring to the Microsoft Windows Operation System. Adobe is a trademark of Adobe Corporation. ArcSoft is the trademark of ArcSoft System, Inc. All other companies or product names are trademarks or registered trademarks of their respective companies.
Safety Instructions Warnings Read and understand all WARNING Do not disassemble, change or repair the camera. This might cause fire or electric shock. For repair or internal inspection, ask the store of purchase. Do not use the camera in areas near water. This might cause fire or electric shock.
Page 6
iv Preface CAUTION Insert the battery paying careful attention to the polarity (+ or -) of the terminals. Inserting the battery with its polarities inverted might cause fire and injury, or damage to the surrounding areas due to the battery rupturing or leaking. Do not fire the flash close to anyone’s eyes.
Page 7
This symbol mark and recycle system apply to EU countries and do not apply to countries in other areas of the world. Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused.
FOR HOME OR OFFICE USE Declaration of Conformity Model number: VPC-S770 Trade Name: SANYO Responsible party: SANYO FISHER COMPANY Address: 21605 Plummer Street Chatsworth, California 91311 Telephone No.: (818) 998-7322 This device complies with Part 15 of the FCC Rules. Operation is subject to the...
Trademark Information ® • Microsoft and Windows Corporation. ® • Pentium is a registered trademark of Intel Corporation. ® • Macintosh is a trademark of Apple Computer, Inc. • SD™ is a trademark. • SDHC™ is a trademark. • Other names and products may be trademarks or registered trademarks of their respective owners.
Table of Contents Preface ... i About this Manual ...i Copyright ... i Federal Communications Commission (FCC) Compliance ... i Declaration of Conformity ... i Trademark Recognition ...ii Safety and Handling Precautions ...ii Camera Information ...ii Battery Information ...ii Introduction ... 1 System Requirements ...1 Package Contents ...1 Main Features ...1...
Page 12
Recording your First Video ...19 Recording Voice Memos ...19 Capture Settings ... 20 The Capture Menu ...20 Image Resolution ... 20 Image Quality ... 21 Focus Zone ... 21 EV Compensation ... 21 M-Burst Interval ... 22 White Balance ... 22 ISO Speed ...
Page 13
The Setup Menu ...36 File Number ... 36 Digital Zoom ... 36 Quick View ... 37 Camera Sound ... 37 Auto LCD Off ... 37 Auto Power Off ... 37 Video Out ... 38 USB Mode ... 38 Date Stamp ... 38 Date and Time ...
Introduction Congratulations on the purchase of your new digital camera. This manual provides step-by-step instructions on how to use your camera, and is intended for your reference only. System Requirements In order to get the most out of your camera, your computer must meet the following system requirements: •...
Bottom View Tripod mount Left / Right View Wrist strap loop LED Indicators LED Status Power/Flash LED Green (steady) Green (blinking) Self-timer LED/ Red (blinking) (1Hz) Assist Lamp Red (blinking) (4Hz) Self-miror: Useful for self portrait. Introduction 3 Battery/SD card compartment Speaker USB/AV port...
4 Introduction Camera Buttons Navigation Buttons The four-way navigation buttons and the OK button allow you to access the various options available from the On Screen Display (OSD) menu. You can configure a wide range of settings to ensure maximum results from your photos and videos. Icon Button Up/Flash/Delete...
Page 19
Icon Button Right/Self-timer/ Burst mode Down/Screen Function 1. Moves right in the OSD menus. 2. In Capture mode: • Press to pan right in AF area selection • Press to scroll through the Self-timer/Burst/ Multi-Burst mode 3. In Video mode: •...
6 Introduction Icon Button Left/Macro The Scene Button The camera is equipped with a convenient Scene button that takes you to the Scene Menu where you can scroll between different modes and choose different scene options. Use the Up/Down navigation buttons to scroll and use the OK button to select.
Backlight Museum Snow Sunset Fireworks Party Beach Copy Video Function Buttons Icon Button MENU Menu Playback Zoom in Zoom out Scroll to Backlight mode. Scroll to Museum mode. Scroll to Snow mode. Scroll to Sunset mode. Scroll to Fireworks mode. Scroll to Party mode.
8 Introduction LCD screen The high resolution 2.4” TFT LCD screen shows all important information regarding camera settings as well as the visual image for your photo or video. Use the Scene button to switch between screen modes. Press the Down/Screen button to switch between a Full display (all icons are displayed), or a Simple display (only mode icon and focus area are shown while other icons are hidden).
Page 23
Name Scene indicator Auto P-Mode Portrait Night Portrait Landscape Sport Night Landscape Backlight Museum Snow Sunset Fireworks Party Beach Copy Video Image Resolution Introduction 9 Scene Icon LCD screen...
Page 24
10 Introduction Image Quality Best Better Good Flash Auto Flash Flash Off Fill Flash Anti Red-eye Self-timer/ M-Burst Burst mode Burst Mode Self Timer Macro indicator Macro Mode Image Counter Capture Mode Video Mode Memory Interface SD Card Internal Memory Date Stamp Zoom Bar Compensation...
Page 25
AF Frame ISO Speed Auto ISO 80 ISO 100 ISO 200 ISO 400 ISO 800 ISO 1000 Focus Zone Multi-Zone Center Selected Area Sharpness High Normal Contrast High Normal Saturation High Normal Introduction 11 LCD screen...
Page 26
12 Introduction White Balance Auto Sunny Tungsten Fluorescent Cloudy Camera Steady Warning AE Metering Average Matrix Spot LCD screen...
Camera Setup Attaching the Wrist Strap Follow these instructions to attach the wrist strap to your camera to facilitate easy carrying: 1. Insert the short loop of the strap in the strap eyelet. 2. String the larger loop of the strap though the short loop and pull tight to attach the strap to the camera.
14 Camera Setup Inserting an SD/MMC Memory Card The camera features 10.5 MB internal flash memory but you may also use an optional SD/MMC memory card for additional storage. Follow these instructions to insert the SD/MMC card. 1. Open the battery com- partment at the bottom of the camera.
First Time Use Press the Power button as described in “Turning On” on page 14, a welcome screen displays momentarily on the LCD screen. If the camera is turned on for the first time, the Language menu pops up automatically after powering on the camera.
16 Getting Started Getting Started Now that you are familiar with the layout of your camera, you are ready to start taking photos and movies. Taking your First Photo Taking a photo with the camera is very simple. Turn the camera on and press the Scene button to access the 1.
Anti Red-eye: The flash fires twice so as to reduce the red-eye effect. Using the Zoom in/out Function The camera comes equipped with 3x optical zoom and 5x digital zoom that allows you to zoom in on your subject. To use the zoom: 1.
18 Getting Started Setting the Scene Mode The camera supports various preset modes for shooting in different environments and conditions. Each setting is configured automatically by the camera. To select scene modes: Press the Scene button to access menu which displays the Scene menu options. 4.
Face Detection AF/AE Function This function is only available in Night Portrait capture modes. When the subject’s face is detected, the yellow focus frames appear on the LCD screen. Then the camera automatically adjusts the focus point and exposure to the optimized value. However, when the camera fails to detect your subject’s face, the camera will set the focus to Multi-Zone with a green or red focus frame.
20 Capture Settings Capture Settings This section describes the various settings you can modify to get better results when taking photos and video clips. The Capture Menu To access the Capture menu: 1. Press the Scene button. Use the Up/Down navigation buttons to select Auto or P-Mode.
Image Quality The Image Quality setting refers to the compression ratio of the JPG. The higher the image quality, the less the image compression ratio but more memory space is required. Use the Up/ Down navigation buttons to select from the options. Three settings for image quality are available: •...
22 Capture Settings M-Burst Interval The M-Burst Interval setting allows you to adjust the burst interval when the multi-burst function is enabled.Use the Up/Down navigation buttons to select from the options. • 1/30 Sec (default) • 1/15 Sec • 1/7.5 Sec White Balance The White Balance setting allows you to adjust the camera setting according to the ambient white...
AE Metering AE Metering allows you to select the area of the subject or frame by which the camera measures light. Use the Up/Down navigation buttons to select from the options. Three AE metering settings are available: • Matrix (default): Camera metering is set for evaluating 16 zones of objects with intelligent weighting in the frame.
24 Capture Settings Contrast The Contrast setting allows you to adjust the contrast of your photos. Use the Up/Down navigation buttons to select from the options. Three contrast settings are available: • High • Normal (default) • Low Setup See “The Setup Menu” on page 36 for more details on the setup menu options. Video Capture Menu To access the video menu: 1.
Contrast See “Contrast” on page 24 for more details on the setup menu options. Setup See “The Setup Menu” on page 36 for more details on the setup menu options. Capture Settings 25 Video Capture Menu...
Page 41
Name Playback mode Image resolution Sharpness Protect Color mode Flash mode Quantity SD card / Internal memory Histogram File Name Date and Time Next Battery status Previous Voice memo Mode icons ISO Speed Contrast White balance Photo & Video Playback 27 Icon Photo mode: Video mode:...
28 Photo & Video Playback AE Metering Saturation EV Compensation Shutter speed Aperture value Image quality Viewing Photos/Videos on the LCD Screen To view your photos and video files on the LCD screen: 1. Press the Playback button displayed. 2. Use the Right/Left navigation buttons to scroll through photos and video clips.
Viewing Photos/Videos on your TV To view images stored on the camera on your TV, you must connect via the A/V port on the side of the camera. To connect your camera to a TV: 1. Turn on the camera and make sure that the camera’s video out format is set to the same as that of the TV.
30 Photo & Video Playback Zooming In During Playback The camera’s zoom feature can also be used during Playback. This allows you to view photos in greater detail. To zoom in on saved photos: 1. Press on the right side of the Zoom button T side of the Zoom button W 2.
Page 45
Use this function to tag pictures stored in your memory card with print information. You can tag all pictures to be printed or just the current picture. You can also select how many copies print and whether to include the date and time. When all images to be printed are tagged, remove the memory card and take it to a photographic shop for printing, or use it with a DPOF compatible printer.
32 Photo & Video Playback Slideshow The Slideshow function allows you to view all stored photos in a continuous sequence. To view a slideshow: 1. Press the MENU button to select Slideshow from the menu. Press the OK button to confirm.
Rotate The Rotate function allows you to change the orientation of a saved photo. To rotate an image: 1. Press the MENU button to select Rotate from the menu. Press the OK button to confirm. 2. Press the Left/Right navigation buttons and the OK button to rotate the select image.
34 Photo & Video Playback Red-Eye Compensation The Red-Eye Compensation function allows you to perform red-eye reduction on a saved photo. To remove red-eye from a photo: 1. Press the MENU button to select Red-Eye Comp. from the menu. Press the OK button to confirm.
Photo & Video Playback 35 Transferring Photos/Videos to your PC To transfer photos and videos to your PC: Use the software CD to install the camera driver. Follow the on-screen instructions to complete the installation. Connect the camera’s USB port to a free USB port on your PC using the USB cable. The camera’s internal memory and/or SD/MMC card appear as removable drives in the file manager.
36 Camera Settings Camera Settings The Setup Menu The setup menu, available in capture and playback modes, allows you to configure the camera’s general settings according to your preferences. To access the setup menu: 1. Press the MENU button when in Playback or any of the capture modes.
Quick View The Quick View setting allows you to view the photo that you have just taken. Once you have taken your photo, it displays on the LCD screen. If you are not satisfied with the result, you can press button to delete the photo immediately.
38 Camera Settings Video Out The Video Out setting allows you to adjust the video output, depending on the type of your TV. Use the Up/Down navigation buttons to select from the menu options. Two options are available: • NTSC (default) •...
Date and Time The Date and Time setting allows you to set or adjust the date and time on your camera. To set or adjust the date and time: • Press the Left/Right navigation buttons to select the Year field. •...
40 Camera Settings Format The Format setting allows you to erase all data in the internal memory or on the SD/MMC card. Use the Up/Down navigation buttons to select from the menu options. Three options are available: • Memory Card (default): All data on the SD/ MMC will be formatted.
PictBridge Print (PTP) The PTP function allows you to print images captured by the camera directly without connecting the camera to a PC. If the camera is not connected to a PTP compliant printer, an error message displays on the LCD screen.To enable PTP function, see “USB Mode”...
42 Camera Settings This Image Print the selected image with the current setting. 1. Use the Up/Down navigation buttons to select This Image from the options and press the OK button to confirm. Use the Left/Right navigation buttons to select previous/next file. 2.
Index Print Use this function to print all images in index format. 1. Press the Up/Down navigation buttons to select the Paper size. • Default Size • Letter • A4 2. Press the Up/Down navigation buttons to set the number of copies. After the number of copies is set, press the Up/Down navigation buttons again to continue or cancel the action.
44 Camera Settings All Images Print all images saved in memory. 1. Use the Up/Down navigation buttons to select All Images from the options and press the OK button to confirm. 2. Press the Up/Down navigation buttons to set the number of copies. 3.
Specifications General Resolution / Image Type Dimensions Exterior Casing Optics Aperture Optical Zoom Digital Zoom Focal Length Focus Mode Shutter Speed Viewfinder Field of View Camera Features Auto Power Off / Time Out Yes ISO Equivalent Internal Memory Flash Modes Shooting Mode Tripod Mount Macro...
Page 61
Video Video Out Stream to SD/MMC Speaker Movie File Format Movie Length Microphone Power Battery Battery Life (Alkaline) Capability Camera Interface Host Platform Standards Operating Temperature Language Specifications 47 PAL, NTSC Yes, Mono Unlimited as long as space is available on the SD/MMC card Yes, Mono AA NiMH/Alkaline/Rechargeable batteries x 2...
48 Troubleshooting Troubleshooting Problem Camera does not turn on Camera turns off automatically LCD turns off automatically Empty battery icon is displayed on the LCD after which camera turns off LCD screen displays ‘Card Requires Formatting’ LCD screen displays ‘Card is Full’...
Page 63
SANYO Electric Co., Ltd. Printed in China...