hit counter script
D-Link DMS-1100-10TS User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Network Router
  5. DMS-1100-10TS
  6. User manual

D-Link DMS-1100-10TS User Manual

Dms-1100 series; l2 2.5 gigabit ethernet switch series
Hide thumbs Also See for DMS-1100-10TS:
Table of Contents

Advertisement

Quick Links

User Manual

DMS -1100 Series
L2 2.5 Gigabit Ethernet Switch Series
Rev.A 1

Advertisement

Table of Contents
loading

Related Manuals for D-Link DMS-1100-10TS

Summary of Contents for D-Link DMS-1100-10TS

  • Page 1: User Manual

    User Manual DMS -1100 Series L2 2.5 Gigabit Ethernet Switch Series Rev.A 1...

  • Page 3: Table Of Contents

    D-Link DMS-1100 Series User Manual Table of Contents Table of Contents ............................. i About This Guide ............................. 1 Terms/Usage ..............................1 Copyright and Trademarks ..........................1 Product Introduction ........................... 2 DMS-1100-10TS ............................3 Front Panel ..............................3 Rear Panel ..............................3 DMS-1100-10TP ............................
  • Page 4 Management > Web ..........................45 Management > Session Timeout ......................46 Management > D-Link Discover Protocol Settings................... 46 L2 Features > FDB > Static FDB > Unicast Static FDB ................47 L2 Features > FDB > Static FDB > Multicast Static FDB ................. 48 L2 Features >...
  • Page 5 D-Link DMS-1100 Series User Manual L2 Features > Voice VLAN > Voice VLAN Device ................... 57 L2 Features > Voice VLAN > Voice VLAN LLDP-MED Device ..............57 L2 Features > STP > STP Global Settings ....................57 L2 Features > STP > STP Port Settings ....................59 L2 Features >...
  • Page 6 D-Link DMS-1100DMS-1100 Series User Manual Monitoring > Mirror Settings ........................103 Green > Power Saving ........................... 104 Green > EEE ............................104 Appendix A - Technical Specifications ..................... 106 Hardware Specifications ..........................106 Features ..............................108 L2 Features ............................108 L3 Features ............................

  • Page 7: About This Guide

    Reproduction in any manner whatever without the written permission of D-Link Corporation is strictly forbidden. Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

  • Page 8: Product Introduction

    QoS and versatile management. Flexible Port Configurations: The DMS-1100 Series is D-Link’s latest 2.5G switch which provides 8-port 2.5GBASE-T plus 2 SFP+ models. The DMS-1100 Series switches, have the advantage of using intuitive feature-rich software and utilizing a neat and simplified Web GUI allowing users to access and configure the Switch from everywhere via a web browser.

  • Page 9: Dms-1100-10Ts

    8-Port 2.5GBASE-T and 2-Port 10G SFP+ Smart Managed Switch. Front Panel Figure 1.1 – DMS-1100-10TS Front Panel Power LED : The Power LED lights up when the Switch is connected to a power source. Fan Error: The Fan error LED lights up when the fan has runtime failure and is brought offline.

  • Page 10: Dms-1100-10Tp

    D-Link DMS-1100 Series User Manual DMS-1100-10TP 8-port 2.5GBASE-T PoE+ and 2-port 10G SFP+ Smart Managed Switch. Front Panel Figure 1.3 – DMS-1100-10TP Front Panel Power LED : The Power LED lights up when the Switch is connected to a power source.

  • Page 11: Dms-1100 Led Indicators

    D-Link DMS-1100 Series User Manual DMS-1100 LED Indicators The Switch supports LED indicators for Power, Fan Error, PoE OK/Fail and Link/Act for each port. The following shows the LED indicators for the DMS-1100 series Smart Managed Switch along with an explanation of each indicator.
  • Page 12 D-Link DMS-1100 Series User Manual Light off No PD device insert.

  • Page 13: Hardware Installation

    D-Link DMS-1100 Series User Manual Hardware Installation This chapter provides unpacking and installation information for the D-Link DMS-1100 Series Switch. Safety Cautions To reduce the risk of bodily injury, electrical shock, fire and damage to the equipment, observe the following precautions: ...

  • Page 14: Step 1: Unpacking

    D-Link DMS-1100 Series User Manual  Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modifications.  Always follow your local/national wiring rules.  When connecting or disconnecting power to hot-pluggable power supplies, if offered with your system, observe the following guidelines: •...

  • Page 15: Rack Installation

    D-Link DMS-1100 Series User Manual Rack Installation The switch can be mounted in an EIA standard size 19-inch rack, which can be placed in a wiring closet with other equipment. To install, attach the mounting brackets to the switch’s side panels (one on each side) and secure them with the screws provided (with 8 M3*6.0 size screws).
  • Page 16 D-Link DMS-1100 Series User Manual Figure 2.2 – Connect the power cord to the Switch C) Slide the Retainer through the Tie Wrap until the end of the cord. Figure 2.3 – Slide the Retainer through the Tie Wrap D) Circle the tie of the Retainer around the power cord and into the locker of the Retainer.
  • Page 17 D-Link DMS-1100 Series User Manual Figure 2.4 – Circle around the power cord E) Fasten the tie of the Retainer until the power cord is secured. Figure 2.5 – Secure the power cord F) Users may now connect the AC power cord to an electrical outlet (preferably one that is grounded and...

  • Page 18: Power Failure

    D-Link DMS-1100 Series User Manual Figure 2.6 – Plugging the switch into an outlet Power Failure As a precaution, the switch should be unplugged in case of power failure. When power is resumed, plug the switch back in. Grounding the Switch This section describes how to connect the DMS-1100 Series Switch to ground.

  • Page 19: Getting Started

    This chapter introduces the management interface of D-Link DMS-1100 Series Switch. Management Options The D-Link DMS-1100 Series Switch can be managed through any port by using the Web-based Management. Each switch must be assigned its own IP Address, which is used for communication with the Web-Based Management or a SNMP network manager.

  • Page 20: Smart Wizard

    User name and Password with “admin” and press Login to enter the main configuration window. Figure 3.3 – Login Dialog Box Smart Wizard After a successful login, the Smart Wizard will guide you through essential settings of the D-Link DMS-1100 Series Switch. Please refer to the Smart Wizard Configuration section for details. Web-based Management By clicking the Exit button in the Smart Wizard, you will enter the Web-based Management interface.

  • Page 21: Configuration

    Smart Wizard Configuration After a successful login, the Smart Wizard will guide you through essential settings of the D-Link DMS-1100 Series Switch. If you do not plan to change anything, click Exit to leave the Wizard and enter the Web Interface.

  • Page 22: Snmp Settings

    D-Link DMS-1100 Series User Manual NOTE: The IPv4 Information of Smart Wizard does not support IPv6 address. SNMP Settings The SNMP Settings page allows user to quickly enable/disable the SNMP function. The default SNMP Setting is Disabled. Click Enabled and then click Next, then it will enter the User Accounts Settings page.

  • Page 23: Web-Based Management

    D-Link DMS-1100 Series User Manual Figure 4.3 – User Accounts Setting in Smart Wizard Web-based Management After clicking the Exit button in the Smart Wizard you will see the screen below: Figure 4.4 – Web-based Management...

  • Page 24: Tool Bar > Save Menu

    Click the D-Link logo at the upper-left corner of the screen to be redirected to the local D-Link website. Tool Bar > Save Menu The Save Menu provides Save Configuration and Save Log functions.

  • Page 25: Tool Bar > Tool Menu

    D-Link DMS-1100 Series User Manual Tool Bar > Tool Menu The Tool Menu offers global functions controls such as Reset, Reboot Device, Configuration Backup and Restore, Firmware Backup and Upgrade. Figure 4.7 – Tool Menu Firmware Information The Firmware Information page displays the firmware image information, including the image that has been booted and the image that is selected for the next reboot.

  • Page 26: Firmware Upgrade & Backup > Firmware Upgrade From Tftp

    D-Link DMS-1100 Series User Manual Figure 4.10 – Tool Menu > Firmware Upgrade & Backup > Firmware Upgrade from HTTP The fields that can be configured for Firmware Upgrade are described below: Item Description Click Choose File button to select the source URL to upgrade the Source URL configuration from.

  • Page 27: Firmware Backup To Http & Backup > Firmware Backup To Tftp

    D-Link DMS-1100 Series User Manual Figure 4.12 – Tool Menu > Firmware Upgrade & Backup > Firmware Backup to HTTP The fields that can be configured for Firmware Backup to HTTP are described below: Item Description Source URL Select the source URL to be backup to.

  • Page 28: Configuration Upgrade & Backup > Configuration Restore From Tftp

    D-Link DMS-1100 Series User Manual Destination URL Displays the destination URL to upgrade to. Check the box to enable the startup configuration function. Startup-config Table 4.6 Click Restore button to upload configuration to the Switch via HTTP. Configuration Upgrade & Backup > Configuration Restore from TFTP The Configuration Restore from TFTP page allows user to load the Switch’s configuration from a saved...

  • Page 29: Log Backup > Log Backup To Http

    D-Link DMS-1100 Series User Manual The fields that can be configured for Configuration Backup from TFTP are described below: Item Description TFTP Server IP Select IPv4 or IPv6 and enter the address to be configured. Source Enter the source URL address.

  • Page 30: Reset

    D-Link DMS-1100 Series User Manual Figure 4.20 – Ping The fields that can be configured for Ping are described below: Item Description IPv4 Ping Target Ipv4 Address Enter the IPv4 address to be pinged. Ping Times (1-255) Specify the ping time. The range is from 1 to 255.

  • Page 31: Tool Bar > Smart Wizard

    Tool Bar > Online Help The Online Help provides two ways of online support: D-link Support Site will lead you to the D-Link website where you can find online resources such as updated firmware; User Guide can offer an immediate reference for the feature definition or configuration guide.
  • Page 32 D-Link DMS-1100 Series User Manual Figure 4.24 – User Guide Micro Site...

  • Page 33: Function Tree

    D-Link DMS-1100 Series User Manual Function Tree All configuration options on the switch are accessed through the Setup menu on the left side of the main window. Click on the setup item that you want to configure. The following sections provide more detailed description of each feature and function.

  • Page 34: System > Port Configuration > Port Settings

    D-Link DMS-1100 Series User Manual Figure 4.27 – System > System Information The fields that can be configured for System Information are described below: Item Description System name Enter the system name to be specified. System Location Enter the system location to be specified.

  • Page 35: System > Port Configuration > Port Status

    D-Link DMS-1100 Series User Manual Full. Select the speed for the ports. The speed values are Auto, 10M, Speed 100M, 1000M, 2.5G and 10G. Any other configuration will result in a link down status for both ports. When the Speed is set to Auto, these capabilities are advertised during auto-negotiation.

  • Page 36: System > Port Configuration > Jumbo Frame

    D-Link DMS-1100 Series User Manual Figure 4.30 – System > Port Configuration > Error Disable Settings The fields that can be configured for Error Disable Settings are described below: Item Description Error Disable Trap Settings Select to enable or disable the notifications when entering into the error Asserted disabled state.

  • Page 37: System > Poe > Poe System (Dms-1100-10Tp Only)

    DMS-1100-10TP works with all D-Link 802.3af or 802.3at capable devices. The Switch is highly compatible with all IEEE 802.3at/af compliant equipment, and transform the PoE to provide power to D-Link wireless APs, IP Cams, IP phones. And also works with DPE-301GS PoE splitter providing 30W power to legacy PD devices.

  • Page 38: System > Poe > Poe Status (Dms-1100-10Tp Only)

    D-Link DMS-1100 Series User Manual Delivered (W) Displays how much power of Watts had been delivered. Specify to enable or disable detecting legacy PDs signal. The default is Legacy Support disabled. Table 4.16 Click Apply to make the configurations take effect.

  • Page 39: System > Poe > Poe Measurement (Dms-1100-10Tp Only)

    D-Link DMS-1100 Series User Manual Select the priority for provisioning power to the port. Options to choose Pirority from are Critical, High and Low. Select the power management mode for the PoE ports. Options to Mode choose from are Auto, Class 1, Class 2, Class 3, and Class 4.

  • Page 40: System > System Log > System Log Server Settings

    D-Link DMS-1100 Series User Manual Source Interface State Select to enable or disable the source interface’s global state. Select the type of interface that will be used. The default option is Type VLAN. Specifies the VLAN ID. The possible range is 1 – 4094.

  • Page 41: System > System Log > System Log

    D-Link DMS-1100 Series User Manual System > System Log > System Log The System Log page displays the system logs on the Switch. Figure 4.38 – System > System Log > System Log System > Time and SNTP > Clock Settings The Clock Settings page allows user to configure the time settings for the Switch.
  • Page 42 D-Link DMS-1100 Series User Manual Figure 4.40 – System > Time and SNTP > Time Zone Settings The fields that can be configured for Time Zone Settings are described below: Item Description Time Zone Settings Select Summer Time State setting. Options to choose from are Summer Time State Disabled, Recurring Setting, and Date Setting.

  • Page 43: System > Time And Sntp > Sntp Settings

    D-Link DMS-1100 Series User Manual From: Date of the Month Select date of the month that daylight saving time will start. From: Month Select the month that daylight saving time will start. From: Year Select the year that the daylight saving time will start.

  • Page 44: Management > User Accounts Settings

    D-Link DMS-1100 Series User Manual Management > User Accounts Settings The User Accounts Settings page allows user to create and configure user accounts. Active user account sessions can be viewed. By default, there is no user account created on the Switch.

  • Page 45: Management > Password Encryption

    D-Link DMS-1100 Series User Manual Management > Password Encryption The Password Encryption page allows user to enable or disable password encryption. Figure 4.44 – Management > Password Encryption The fields that can be configured for Password Encryption are described below:...

  • Page 46: Management > Snmp > Snmp View Table Settings

    D-Link DMS-1100 Series User Manual SNMP Global Settings Specify to enable or disable the SNMP feature. The default setting is SNMP Global State Disabled. SNMP Response Broadcast Select to enable or disable the server to response to broadcast SNMP Request GetRequest packets.

  • Page 47: Management > Snmp > Snmp Community Table Settings

    D-Link DMS-1100 Series User Manual Figure 4.46 – Management > SNMP > SNMP View Table Settings The fields that can be configured for SNMP View Table Settings are described below: Item Description View Name Create a name of the view, up to 32 characters.

  • Page 48: Management > Snmp > Snmp Group Table Settings

    D-Link DMS-1100 Series User Manual Select the key type for the SNMP community. Select either Plain Text Key Type or Encrypted. Select an alphanumeric string of up to 32 characters that is used to identify members of an SNMP community. This string is used like a...

  • Page 49: Management > Snmp > Snmp Engine Id Local Settings

    D-Link DMS-1100 Series User Manual ◆ SNMPv3 - SNMPv3 provides secure access to devices through a combination of authentication and encryption. This function is only available when you select SNMPv3 security level. ◆ NoAuthNoPriv – No authorization and no encryption for packets sent between the Switch and SNMP manager.
  • Page 50 D-Link DMS-1100 Series User Manual Figure 4.50 – Management > SNMP > SNMP User Table Settings The fields that can be configured for SNMP User Table Settings are described below: Item Description User Name Enter a SNMP user name of up to 32 characters.

  • Page 51: Management > Snmp > Snmp Host Table Settings

    D-Link DMS-1100 Series User Manual Table 4.29 Click Add to create a new SNMP user account or click Delete to remove any existing data. Management > SNMP > SNMP Host Table Settings The SNMP Host Table Settings page allows user to configure the SNMP trap recipients.

  • Page 52: Management > Session Timeout

    The default is 180. Table 4.32 Click Apply to make the configurations take effect. Management > D-Link Discover Protocol Settings The D-Link Discover Protocol Settings page allows user to configure and display D-Link Discovery Protocol (DDP).

  • Page 53: L2 Features > Fdb > Static Fdb > Unicast Static Fdb

    D-Link DMS-1100 Series User Manual Figure 4.54 – Management > D-Link Discover Protocol Settings The fields that can be configured for D-Link Discover Protocol Settings are described below: Item Description DDP Global Settings D-Link Discovery Protocol Select the enable or disable the D-Link Discovery Protocol state.

  • Page 54: L2 Features > Fdb > Static Fdb > Multicast Static Fdb

    D-Link DMS-1100 Series User Manual and port number. VID (1-4094): Enter the VLAN ID on which the associated unicast MAC address resides. MAC Address: Enter the MAC address to which packets will be statically forwarded or dropped. This must be a unicast MAC address.

  • Page 55: L2 Features > Fdb > Mac Address Table Settings

    D-Link DMS-1100 Series User Manual Click the Delete All button to remove all the entries. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

  • Page 56: L2 Features > Fdb > Mac Address Table

    D-Link DMS-1100 Series User Manual specified ports. Table 4.37 Click Apply to make the configurations take effect. L2 Features > FDB > MAC Address Table The MAC Address Table page allows user to view the entries listed in the MAC address table.

  • Page 57: L2 Features > Asymmetric Vlan

    D-Link DMS-1100 Series User Manual The fields that can be configured for 802.1Q VLAN are described below: Item Description 802.1Q VLAN VID List Enter the VLAN ID list that will be created. Find VLAN VID (1-4094) Enter the VLAN ID to be displayed.
  • Page 58 D-Link DMS-1100 Series User Manual Click the VLAN Detail button to view more detailed information about the VLAN on the specific interface. Click the Edit button to re-configure the specific entry. After clicking the VLAN Detail button, the following page will appear: Figure 4.63 –...

  • Page 59: L2 Features > Auto Surveillance Vlan > Auto Surveillance Properties

    D-Link DMS-1100 Series User Manual Add Mode Select whether to add an Untagged or Tagged parameters. Allowed VLAN Range Enter the allowed VLAN range information. Clone Tick the Clone check box to copy the configuration to specified ports. From Port / To Port Copy the configuration of VLAN interface for specified port ranges.

  • Page 60: L2 Features > Auto Surveillance Vlan > Mac Settings And Surveillance Device

    D-Link DMS-1100 Series User Manual device is aged out, the surveillance VLAN aging timer will be started. The port will be removed from the surveillance VLAN after expiration of surveillance VLAN aging timer. If the surveillance traffic resumes during the aging time, the aging counter will be reset and the timer will stop.

  • Page 61: L2 Features > Voice Vlan > Voice Vlan Global

    D-Link DMS-1100 Series User Manual Figure 4.67 – L2 Features > Auto Surveillance VLAN > MAC Settings and Surveillance Device L2 Features > Voice VLAN > Voice VLAN Global The Voice VLAN is a VLAN used to carry voice traffic from an IP phone. As the sound quality of Voice over IP, is sensitive to delay Quality of service (QoS) for voice traffic should be configured to ensure that voice traffic is handled with a higher priority.

  • Page 62: L2 Features > Voice Vlan > Voice Vlan Oui

    D-Link DMS-1100 Series User Manual Figure 4.69 – L2 Features > Voice VLAN > Voice VLAN Port The fields that can be configured for Voice VLAN Port are described below: Item Description From Port / To Port Select the appropriate port range used for the configuration.

  • Page 63: L2 Features > Voice Vlan > Voice Vlan Device

    D-Link DMS-1100 Series User Manual OUI Address Specify the OUI MAC address. Mask Specify the OUI MAC address matching bitmask. Enter the description for the user-defined OUI with a maximum of 32 Description characters. Table 4.46 Click the Apply button to accept the changes made.
  • Page 64 D-Link DMS-1100 Series User Manual By default, Rapid Spanning Tree is disabled. If enabled, the Switch will listen for Bridge Protocol Data Unit (BPDU) packets and its accompanying Hello packet. The BPDU packets are sent even if a BPDU packet is not received.

  • Page 65: L2 Features > Stp > Stp Port Settings

    D-Link DMS-1100 Series User Manual value ensures that the Switch has spanning tree configuration consistent with other devices on the LAN. Enter the bridge’s forwarding time value. This value must be between 4 and 30 seconds. By default, this value is 15 seconds. Any port on the...
  • Page 66 D-Link DMS-1100 Series User Manual Figure 4.74 – L2 Features > STP > STP Port Settings The fields that can be configured for STP Port Settings are described below: Item Description Enter a consecutive group of ports to be configured starting with the From Port/To Port selected port.

  • Page 67: L2 Features > Stp > Mst Configuration Identification

    D-Link DMS-1100 Series User Manual Select to enable or disable the TCN filter option. Enabling TCN filtering on a port is useful for connecting to an external network, which may not TCN Filter be under full control of the administrator. When a port is set to the TCN filter mode, the topology change event received by the port will be ignored.

  • Page 68: L2 Features > Stp > Stp Instance

    D-Link DMS-1100 Series User Manual spanning tree instance). If a configuration name is not set, this field shows the MAC address of the device running MSTP. This value, together with the configuration name and identical VLANs Revision Level(0 - 65535) mapped for STP instance IDs identifies the MST region configured on the switch.

  • Page 69: L2 Features > Erps(G.8032) > Erps

    D-Link DMS-1100 Series User Manual Item Description Port Select the port to be fined. Table 4.50 Click the Clear Detected Protocol button to clear the detected protocol settings for the port selected. Click Find to search the MSTP port information.
  • Page 70 D-Link DMS-1100 Series User Manual Click Edit Instance button to modify the ERP instance, click Show Status button to display the ERPS physical ring’s status information, or click Delete button to remove the Ethernet instance. Click Edit Instance to modify the Ethernet Instance configuration: Figure 4.80 –...

  • Page 71: L2 Features > Erps(G.8032) > Erps Profile

    D-Link DMS-1100 Series User Manual Click Show Status button to display the ERPS status information. Figure 4.81 – L2 Features > ERPS(G.8032) > ERPS – Show Status L2 Features > ERPS(G.8032) > ERPS Profile The ERPS Profile page allows user to configure the ERPS profile information of the Switch.

  • Page 72: L2 Features > Loopback Detection

    D-Link DMS-1100 Series User Manual Click Edit button to configure the Ethernet Profile settings: Figure 4.84 – L2 Features > ERPS(G.8032) > ERPS Profile - Edit The fields that can be configured for edit ERPS Profile are described below: Item...

  • Page 73: L2 Features > Link Aggregation

    D-Link DMS-1100 Series User Manual Figure 4.85 – L2 Features > Loopback Detection Settings The fields that can be configured for Loopback Detection Settings are described below: Item Description Loopback Detection Global Settings Loopback Detection State Enable or disable loopback detection. The default is disabled.
  • Page 74 D-Link DMS-1100 Series User Manual Figure 4.86 – L2 Features > Link Aggregation The fields that can be configured for Link Aggregation are described below: Item Description Ling Aggregation Settings Enter the system’s priority value. This must be between 1 and 65535.

  • Page 75: L2 Features > L2 Multicast Control > Igmp Snooping > Igmp Snooping Settings

    D-Link DMS-1100 Series User Manual L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Settings With Internet Group Management Protocol (IGMP) snooping, the DMS-1100 Series Switch can make intelligent multicast forwarding decisions by examining the contents of each frame’s Layer 2 MAC header.
  • Page 76 D-Link DMS-1100 Series User Manual Figure 4.88 – L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping – Show Detail Click the Modify button to edit the information in the following window: Figure 4.89 L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping – Modify...

  • Page 77: L2 Features > L2 Multicast Control > Igmp Snooping > Igmp Snooping Groups Settings

    D-Link DMS-1100 Series User Manual (1-25) group-specific or group-source-specific query messages. Table 4.58 Click Apply to make the configurations take effect. L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Groups Settings The IGMP snooping Groups Settings page allows user to configure and view the IGMP snooping static group, and view IGMP snooping group.

  • Page 78: L2 Features > L2 Multicast Control > Igmp Snooping > Igmp Snooping Mrouter Settings

    D-Link DMS-1100 Series User Manual Click the Find All button to view all the entries. L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Mrouter Settings The IGMP Snooping Mrouter Settings page allows user to configure interfaces as multicast router ports or ports that cannot be multicast router ports on the Switch.

  • Page 79: L2 Features > L2 Multicast Control > Mld Snooping > Mld Snooping Setting

    D-Link DMS-1100 Series User Manual Figure 4.92 – L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Statistics Settings The fields that can be configured for IGMP Snooping Statistics Settings are displayed below: Item Description Statistics Select the interface to be cleared. The options are All and VLAN.
  • Page 80 D-Link DMS-1100 Series User Manual The fields that can be configured for MLD Snooping Settings are described below: Item Description Global Settings Global State Select to enable or disable the MLD Snooping state. VLAN Status Settings Enter the VLAN ID and select to enable or disable MLD snooping on VID (1-4094) the VLAN.

  • Page 81: L2 Features > L2 Multicast Control > Mld Snooping > Mld Snooping Groups Settings

    D-Link DMS-1100 Series User Manual Figure 4.95 – L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Setting – Edit The fields that can be configured for MLD Snooping Settings are displayed below: Item Description Fast Leave Select to enable or disable the MLD snooping fast leave function.

  • Page 82: L2 Features > L2 Multicast Control > Mld Snooping > Mld Snooping Mrouter Settings

    D-Link DMS-1100 Series User Manual Figure 4.96 – L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Group Settings The fields that can be configured for MLD Snooping Group Settings are displayed below: Item Description VID (1-4094) Enter the VLAN ID.

  • Page 83: L2 Features > L2 Multicast Control > Mld Snooping > Mld Snooping Statistics Settings

    D-Link DMS-1100 Series User Manual Figure 4.97 – L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Mrouter Settings The fields that can be configured for the MLD Snooping Mrouter Table are described below: Item Description VID (1-4094) Enter the VLAN ID.

  • Page 84: L2 Features > Lldp > Lldp Global Settings

    D-Link DMS-1100 Series User Manual Item Description Select the type of statistics to display. Available options are All and Statistics VLAN. VID (1-4094) Enter the VLAN ID to be specified. Table 4.70 Click the Clear button to remove the entries.

  • Page 85: L2 Features > Lldp > Lldp Port Settings

    D-Link DMS-1100 Series User Manual Item Description LLDP Global Settings Select to enable or disable LLDP globally on the Switch. With this LLDP State enabled, the Switch will transmit receive and process LLDP packets. Select to enable or disable LLDP forward state. When the LLDP State...

  • Page 86: L2 Features > Lldp > Lldp Management Address List

    D-Link DMS-1100 Series User Manual Figure 4.100 – L2 Features> LLDP > LLDP Port Settings The fields that can be configured for the LLDP Port Settings are described below: Item Description From Port/ To Port Select the range of ports to be configured.

  • Page 87: L2 Features > Lldp > Lldp Basic Tlvs Settings

    D-Link DMS-1100 Series User Manual The fields that can be displayed for the LLDP Management Address List are described below: Item Description Management Address Select IPv4, IPv6 or All address to be displayed. Subtype Displays the managed address subtype (e.g. MAC or IPv4) Address Displays the IP address.

  • Page 88: L2 Features > Lldp > Lldp Dot1 Tlvs Settings

    D-Link DMS-1100 Series User Manual L2 Features > LLDP > LLDP Dot1 TLVs Settings This LLDP Dot1 TLVs Settings page allows user to configure an individual port or group of ports to exclude one or more of the IEEE 802.1 organizational port VLAN ID TLV data types from outbound LLDP advertisements.
  • Page 89 D-Link DMS-1100 Series User Manual Figure 4.104 – L2 Features > LLDP > LLDP Dot3 TLVs Settings The fields that can be configured for the LLDP Dot3 TLVs Settings are described below: Item Description A consecutive group of ports may be configured starting with the From Port / To Port selected port.

  • Page 90: L2 Features > Lldp > Lldp-Med Port Settings

    D-Link DMS-1100 Series User Manual L2 Features > LLDP > LLDP-MED Port Settings The LLDP-MED Port Settings page allows user to enable or disable transmitting LLDP-MED TLVs. Figure 4.105 – L2 Features > LLDP > LLDP-MED Port Settings The fields that can be configured for the LLDP-MED Port Settings are described below:...
  • Page 91 D-Link DMS-1100 Series User Manual Figure 4.106 – L2 Features > LLDP > LLDP Statistics Information The fields that can be displayed for the LLDP Statistics information are described below: Item Description Displays the time of the last change. It also displays the amount of time Last Change Time that has elapsed since the change was detected.

  • Page 92: L2 Features > Lldp > Lldp Local Port Information

    D-Link DMS-1100 Series User Manual Each LLDP frame contains information about how long time the LLDP information is valid. If no new LLDP frame is received within the age Total Ageouts out time, the LLDP information is removed, and the Age-Out counter is incremented.

  • Page 93: L2 Features > Lldp > Lldp Neighbor Port Information

    D-Link DMS-1100 Series User Manual Figure 4.108 – L2 Features > LLDP > LLDP Local Port Information – Show Detail Click the Back button to return to the previous window. L2 Features > LLDP > LLDP Neighbor Port Information This LLDP Neighbor Port Information page allows user to view the information on a per-port basis for populating outbound LLDP advertisements in the local port brief table shown below.
  • Page 94 D-Link DMS-1100 Series User Manual Figure 4.111 – L3 Features > IPv4 Interface Settings - Edit The fields that can be configured for IPv4 Interface Settings are described below: Item Description Management VLAN Settings VID (1-4094) Enter the VLAN ID on which the associated management VLAN ID.

  • Page 95: L3 Features > Ipv4 Default Gateway

    D-Link DMS-1100 Series User Manual Host Name Enter the host name. Enter the preferred lease time for the IP address to request from the Lease DHCP server. Enter the day duration of the lease, or select the hour and minute duration of the lease.

  • Page 96: L3 Features > Ipv6 Default Gateway

    D-Link DMS-1100 Series User Manual Figure 4.115 – L3 Features > IPv6 Interface - Detail The fields that can be configured for IPv6 Interface Settings are described below: Item Description IPv6 Interface Settings IPv6 State Select to enable or disable the IPv6 interface’s global state.

  • Page 97: Qos > Port Default Cos

    D-Link DMS-1100 Series User Manual The fields that can be configured for the IPv6 Default Gateway are described below: Item Description Enter interface’s VLAN ID that will be associated with this route. Interface VLAN (1-4094) Next Hop IPv6 Address Enter the router’s next hop IPv6 address.

  • Page 98: Qos > Queue Settings

    D-Link DMS-1100 Series User Manual Figure 4.119 – QoS > Port Scheduler Method The fields that can be configured for the Port Scheduler Method are described below: Item Description From Port / To Port Select the range of ports to be configured.

  • Page 99: Qos > Cos To Queue Mapping

    D-Link DMS-1100 Series User Manual Click Apply to make the configurations take effect. QoS > CoS to Queue Mapping The CoS to Queue Mapping page allows user to view and configure the CoS-to-Queue mapping settings. Figure 4.121 – QoS > CoS to Queue Mapping...

  • Page 100: Security > Safeguard Engine

    Click Apply to make the configurations take effect. Security > Safeguard Engine D-Link’s Safeguard Engine is a robust and innovative technology that automatically throttles the impact of packet flooding into the switch's CPU. This function helps to protect the Switch from being interrupted by malicious viruses or worm attacks.

  • Page 101: Security > Traffic Segmentation Settings

    D-Link DMS-1100 Series User Manual IPv4 Host Specify the IPv4 host address. Type Specify the trusted host type. The options are Ping, HTTP and HTTPS. Table 4.92 Click Apply to make the configurations take effect. Security > Traffic Segmentation Settings This feature provides administrators to limit traffic flow from a single port to a group of ports on a single Switch.
  • Page 102 D-Link DMS-1100 Series User Manual Figure 4.126 – Security > Storm Control Settings The fields that can be configured for Storm Control Settings are described below: Item Description Storm Control Trap Settings Select the storm control trap state. The options are None, Storm Occur, Storm Clear, and Both.

  • Page 103: Security > Dos Attack Prevention Settings

    D-Link DMS-1100 Series User Manual Click Apply to make the configurations take effect. Security > DoS Attack Prevention Settings The DoS Attack Prevention Settings page allows user to view and configure the Denial-of-Service (DoS) attack prevention settings. Figure 4.127 – Security > DoS Attack Prevention Settings...

  • Page 104: Security > Ssl > Ssl Service Policy

    D-Link DMS-1100 Series User Manual Item Description SSL Status Select to enable or disable the SSL feature’s global status. Service Policy Enter service policy name. Table 4.96 Click Apply to make the configurations take effect. NOTE: When SSL is enabled, it will take longer to open a web page due to the extra processing required for encryption.

  • Page 105: Oam > Cable Diagnostics

    D-Link DMS-1100 Series User Manual OAM > Cable Diagnostics The Cable Diagnostics page is designed primarily for administrators and customer service representatives to examine the copper cable quality. It determines the type of cable errors in the cable. Select the range of ports and then click the Test button to start the diagnosis.

  • Page 106: Monitoring > Statistics > Port Counters

    D-Link DMS-1100 Series User Manual Item Description From Port / To Port Select the range of ports to be configured. Table 4.98 Click the Find button to locate a specific entry based on the information entered. Click the Refresh button to refresh the display table.
  • Page 107 D-Link DMS-1100 Series User Manual Figure 4.133 – Monitoring > Statistics > Port Counters The fields that can be displayed for Port Counters are described below: Item Description From Port / To Port Select the range of ports to be viewed.

  • Page 108: Monitoring > Statistics > Counters

    D-Link DMS-1100 Series User Manual Monitoring > Statistics > Counters The Counters page allows user to display all port counters, and clear the port counters of the specified or all ports. Figure 4.135 – Monitoring > Statistics > Counters The fields that can be displayed for Counters are described below:...

  • Page 109: Monitoring > Mirror Settings

    D-Link DMS-1100 Series User Manual Figure 4.136 – Monitoring > Statistics > Counters – Show Detail Click the Back button to return to the previous window. Click the Refresh button to refresh the display table. Monitoring > Mirror Settings The Mirror Settings page allows user to view and configure the port mirroring feature.

  • Page 110: Green > Power Saving

    D-Link DMS-1100 Series User Manual Destination Select the destination port for mirror settings. Select the range of ports to be the source port and Frame Type to be Source mirrored. Mirror Session Table Mirror Session Table Select the Mirror Session Type to be displayed.
  • Page 111 D-Link DMS-1100 Series User Manual Item Description From Port / To Port Select the range of ports to be configured. State Select to enable or disable the EEE feature. Table 4.103 Click Apply to make the configurations take effect.

  • Page 112: Appendix A - Technical Specifications

    Support manual/auto MDI/MDIX configuration Support Auto-Negotiation for each port Hardware interrupt signal to CPU when port link down for ERPS DMS-1100-10TS: 2 x 1000/10G ports (Port 9 and Port 10) DMS-1100-10TP: 2 x 1000/10G ports (Port 9 and Port 10) SFP+ Ports Supported SFP+ Direct Attached Cables: ...
  • Page 113 Fans DMS-1100-10TP: 3 Smart Fans Operating Temperature -5~50°C Storage Temperature -40~70°C Humidity Storage: 0%~95% non-condensing DMS-1100-10TS: 440mm x 210mm x 44mm Dimensions DMS-1100-10TP: 440mm x 250mm x 44mm DMS-1100-10TS: 2.53kg Weight DMS-1100-10TP: 3.43kg CE, FCC/IC, VCCI, BSMI, C-Tick, CCC Safety...

  • Page 114: Features

    Power Saving: Enabled by default to save Loopback Detection power: 802.3ad Link Aggregation: - By Link Status: Drastically save power - DMS-1100-10TS: up to 8 groups per when the switch port link is down. For device and 8 ports per group example, connection - DMS-1100-10TP: up to 8 groups per connected PC is powered off.

  • Page 115: Appendix B - Rack Mount Instructions

    Appendix B – Rack mount Instructions D-Link DMS-1100 Series User Manual Appendix B – Rack mount Instructions Safety Instructions - Rack Mount Instructions - The following or similar rack-mount instructions are included with the installation instructions: A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient.

This manual is also suitable for:

Dms-1100-10tp

Table of Contents