Page 1
1.1.1 Connecting cable Use a 2-wire cable between the analog fax machine and the Nokia 32 terminal. If you use a 4-pin RJ-11 cable, connect only the pins 2 and 3, as shown in picture 1. If you use a 6-pin RJ-11 cable, connect only the pins 3 and 4, as shown in picture 2.
Page 2
LED 3 blinks green. 1.4 Using Nokia 32 terminal in permanent analog fax mode You can set the Nokia 32 terminal to permanent analog fax mode. In this mode, all calls are handled as fax calls. When the Nokia 32 terminal is in permanent fax mode, the actual GSM voice channel enhancements are not in use and thus the voice quality may be poor.
Page 3
Typically when a SIM card is activated for mobile services, only the voice and data services are activated. However, when using the analog fax feature of the Nokia 32 terminal, you must ask the operator to activate the fax service both for sending and receiving faxes.