Page 1
OWNER’S MANUAL LED LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference. LED LCD MONITOR MODEL E2342V E2442V E2742V www.lg.com...
MODE Setting ASSEMBLING AND PREPAR- TROUBLESHOOTING Unpacking Parts and buttons SPECIFICATIONS Setting up the Monitor set - Attaching the Stand E2342V - Detaching the Stand E2442V - Mounting on a table E2742V - Mounting on a wall Preset Modes (Resolution) Indicator...
(Depending on the country) Stand Body Stand Body Stand Base ( E2342V /E2442V ) ( E2742V ) CAUTION Do not use any unapproved accessories to ensure the safety and product life span. Any damages or injuries by using unapproved accessories are not covered by the warranty.
ASSEMBLING AND PREPARING Parts and buttons Power Indicator Lighting On: Turned on Lighting Off: Turned off (Power Button) MENU / INPUT / MODE / AUTO / EXIT Button (See p.12) DC-IN Connection panel (See p.10)
Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. Stand Body E2342V/E2442V Attach the Stand body and then attach the Stand Base,then tighten the screw to the right with a Stand Base Coin.
Remove 2 screws and pull out the Stand Body from the Monitor set. E2342V/E2442V Turn the screw to the left with a Coin, and then pull out the Stand Base from the Stand Body, then pull out the Stand Body from the Monitor set .
ASSEMBLING AND PREPARING Mounting on a table Press (Power) button on the bottom switch panel to turn the power on. Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation.
Page 8
ASSEMBLING AND PREPARING WARNING Using the Kensington security system When you adjust the angle, do not hold the The Kensington security system connector is bottom of the Monitor set frame as shown on located at the back of the Monitor set. For more the following illustration, as may injure your information of installation and using, refer to the fingers.
If you use improper screw, the product might be damaged and drop from mounted position. In on the wall mount. Be sure to use the proper this case, LG Electronics is not responsible for length. For more information, refer to the instructions supplied with the wall mount.
USING THE MONITOR SET USING THE MONITOR SET DVI-D connection Connecting to a PC Transmits a digital video signal from your PC to Your Monitor set supports Plug & Play*. the Monitor set. Connect the PC and the Monitor *Plug & Play: A PC recognizes a connected set with a DVI cable as shown in the following device that users connect to a PC and turn illustrations.
Page 11
USING THE MONITOR SET Self Image Setting Function CAUTION Press the power button on the bottom panel to turn the power on. When monitor power is turned Connect the signal on, the "Self Image Setting" Function is executed input cable and tighten automatically.
USING THE MONITOR SET CUSTOMIZING SETTINGS Press the desired button on the bottom of the Monitor set . Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button.
CUSTOMIZING SETTINGS Customizing Settings MENU BRIGHTNESS Menu Settings CONTRAST Press button on the bottom of the Monitor set to MENU WIDE / ORIGINAL 1 / 2 WIDE RESET display the MENU OSD. 1 / 2 Set the options by pressing the ◄ or ► or ▼ buttons. NEXT MENU Select the " NEXT MENU "...
CUSTOMIZING SETTINGS Picture Press MENU button on the bottom of the Monitor set to > > NEXT MENU PICTURE display the MENU OSD. MENU Select the " " button to enter the more option SHARPNESS NEXT MENU settings. BLACK LEVEL HIGN 1 / 2 OVERSCAN...
CUSTOMIZING SETTINGS COLOR Press MENU button on the bottom of the Monitor set to > > display the MENU OSD. NEXT MENU COLOR MENU Select the " NEXT MENU " button to enter the more option GAMMA 2 / 3 GAMMA 1 settings.
CUSTOMIZING SETTINGS DISPLAY Press MENU button on the bottom of the Monitor set to display the MENU OSD. > > MENU NEXT MENU DISPLAY Select the " NEXT MENU " button to enter the more option settings. HORIZONTAL Select DISPLAY by pressing the ► button. VERTICAL CLOCK Enter to DISPLAY by pressing the ▼...
CUSTOMIZING SETTINGS OTHERS Press MENU button on the bottom of the Monitor set to display the MENU OSD. > > NEXT MENU OTHERS MENU Select the " NEXT MENU " button to enter the more option settings. 1 / 15 ENGLISH LANGUAGE POWER INDICATOR...
TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2. SAVING DATA(W/h) 584 mm (23 inch) 610 mm (24 inch) 685 mm (27 inch) SUPER SAVING 7W/h 9 W/h 7 W/h LED SAVING 14 W/h 13 W/h 19 W/h Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor. LG calculated these values by using “broadcast video signal”. LED Saving refers to how much power can be saved using a WLED Panel instead of CCFL panel. SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING function.
TROUBLESHOOTING PICTURE MODE Setting Press button on the bottom of the Monitor set to display the PICTURE MODE OSD . MODE Set the options by pressing ◄ or ► buttons. Select EXIT to leave the OSD menu. PICTURE MODE TEXT PHOTO CINEMA GAME CUSTOM Each option is explained below. Description PICTURE MODE CUSTOM...
SPECIFICATIONS TROUBLESHOOTING Check the following before calling for service. No image appears y Check and see if the power cord is connected properly to the power Is the power cord of the display connected? outlet. y Press the Power button. Is the power indicator light on? Is the power on and the power Adjust the brightness and the contrast.
Page 21
Be sure to install the display driver from the display driver CD (or Have you installed the display driver? diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. y Make sure to check if the video card supports Plug&Play function.
SPECIFICATIONS SPECIFICATIONS E2342V Display Screen Type 58.3 cm (23 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coating Visible diagonal size: 58.3 cm Pixel Pitch 0.265 mm x 0.265 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic)
Page 23
SPECIFICATIONS SPECIFICATIONS E2442V Display Screen Type 60.9 cm (24 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 61.0 cm Pixel Pitch 0.277 mm x 0.277 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI)
Page 24
SPECIFICATIONS SPECIFICATIONS E2742V Display Screen Type 68.5 cm (27 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 68.5 cm Pixel Pitch 0.311 mm x 0.311 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI)
SPECIFICATIONS Preset Modes (Resolution) E2342V, E2442V, E2742V Horizontal Vertical Display Modes (Resolution) Polarity(H/V) Frequency(kHz) Frequency(Hz) 720 x 400 31.468 640 x 480 31.469 640 x 480 37.500 800 x 600 37.879 800 x 600 46.875 1024 x 768 48.363 1024 x 768 60.023...
Page 26
SPECIFICATIONS PROPER POSTURE Proper posture for using the Monitor set. Adjust the Adjust the location of the Monitor set and Monitor set to avoid it your posture to reflecting light. allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright.
Page 27
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible ENERGY STAR is a set of power-saving place for future reference. guidelines issued by the U.S.Environmental The model and serial number of the SET is Protection Agency(EPA).