Cisco LightStream 1010 Configuration Note
Atm switch 622 sm/mm port adapter module
Hide thumbs
Also See for LightStream 1010:
- Getting started manual (182 pages) ,
- Hardware installation manual (40 pages) ,
- Configuration note (21 pages)
Table of Contents
Advertisement
Quick Links
Doc. No.
78-3302-01 Rev. A0
LightStream 1010 ATM Switch 622 SM/MM Port
Adapter Module Configuration Note
Product Numbers: WAI-OC12-1SM=, WAI-OC12-1MM=
This document contains instructions for installing and configuring the 622 single-mode (SM) and the
622 multimode port adapter modules. For a complete description of commands used to configure and
maintain the 622 SM/MM port adapter modules, refer to the LightStream 1010 ATM Switch Software
Configuration Guide and the LightStream 1010 ATM Switch Command Reference publications. For
complete hardware configuration and maintenance procedures, refer to the LightStream 1010 ATM
Switch User Guide publication.
Cisco documentation and additional literature are available on a CD called Cisco Connection
Documentation, Enterprise Series. The CD is updated and shipped monthly, so it might be more
up-to-date than the printed documentation. To order the Cisco Connection Documentation,
Enterprise Series CD, contact your local sales representative or call Customer Service. The CD is
available both as a single CD and as an annual subscription. You can access Cisco technical
documentation on the World Wide Web Universal Resources Locator (URL)
http://www.cisco.com.
Note
Sections in this document include the following:
•
•
•
•
•
•
•
•
Copyright © 1996
Cisco Systems, Inc.
All rights reserved.
The 622 MM PAMs only work with version 11.1(4) of the IOS software.
What is the LightStream 1010 ATM Switch?
622 SM Port Adapter Module Description
622 MM Port Adapter Module Description
Module LEDs
Preparing Network Connections
Safety Recommendations
Installing and Replacing PAMs
Configuring the Interfaces
1
Advertisement
Table of Contents
Related Manuals for Cisco LightStream 1010
Summary of Contents for Cisco LightStream 1010
- Page 1 622 multimode port adapter modules. For a complete description of commands used to configure and maintain the 622 SM/MM port adapter modules, refer to the LightStream 1010 ATM Switch Software Configuration Guide and the LightStream 1010 ATM Switch Command Reference publications. For complete hardware configuration and maintenance procedures, refer to the LightStream 1010 ATM...
- Page 2 LAN segments, or other ATM switches and routers using fiber-optic, unshielded twisted-pair (UTP), and coaxial cable. The LightStream 1010 ATM switch can accommodate up to 8 OC-12 switched ATM ports in a standard 19-inch (48-centimeter) rack. Figure 2 shows an example of a network configuration using the LightStream 1010 ATM switch in a high-performance workgroup.
- Page 3 LightStream 1010 Workgroup Configuration Example Workstations LightStream 1010 ATM Switch Servers Figure 3 shows an example of a network configuration using the LightStream 1010 ATM switch for a campus backbone. Figure 3 LightStream 1010 Backbone Configuration Example Catalyst 5000 Catalyst 5000...
-
Page 4: Specifications
-40 to 167F (-40 to 75C) Humidity 10 to 90%, noncondensing Altitude -500 to 10,000 ft (-52 to 3,048 m) Interface timing Loop timing, Stratum 4 accuracy clock for self-timing 4 LightStream 1010 ATM Switch 622 SM/MM Port Adapter Module Configuration Note... -
Page 5: Maximum Configuration
You can install any combination of PAMs in any of the eight available PAM slots. There are no restrictions on either the number of modules that can be installed or their proximity to the ASP. LightStream 1010 ATM Switch 622 SM/MM Port Adapter Module Configuration Note... -
Page 6: Module Leds
Do not stare into the laser beam. To see translated versions of this warning, refer to the Warning appendix “Translated Safety Warnings” in the LightStream 1010 ATM Switch User Guide. The LEDs on the 622 MM PAM provide status information for the SC fiber-optic interface connection. -
Page 7: Distance Limitations
If you intend to build your own cables, refer to the cable pinouts in the section “Installing the LightStream 1010 Switch” in the LightStream 1010 ATM Switch User Guide publication. For ordering information, contact a customer service... - Page 8 1300NM CLASS 1 LASER PRODUCT To see translated versions of this warning, refer to the appendix “Translated Safety Warnings” in the LightStream 1010 ATM Switch User Guide. 8 LightStream 1010 ATM Switch 622 SM/MM Port Adapter Module Configuration Note...
-
Page 9: Safety Recommendations
In addition, use the guidelines that follow when working with any equipment that is disconnected from a power source but still connected to telephone wiring or other network cabling. LightStream 1010 ATM Switch 622 SM/MM Port Adapter Module Configuration Note... -
Page 10: Preventing Electrostatic Discharge Damage
When removing any module, connect the equipment end of the strap to one of the captive installation screws on an installed PAM or power supply. (See Figure 9.) 10 LightStream 1010 ATM Switch 622 SM/MM Port Adapter Module Configuration Note... - Page 11 The hot-swap feature allows you to remove and replace modules while the system is operating; you do not need to notify the software or shut down the system power. All CAMs and PAMs (except for the ASP) support hot-swapping. LightStream 1010 ATM Switch 622 SM/MM Port Adapter Module Configuration Note...
-
Page 12: Tools Required
(ESD) damage. See the section “Preventing Electrostatic Discharge Damage” in the chapter “Preparing for Installation” in the LightStream 1010 ATM Switch User Guide. 1. Instructions for initial interface configurations are in the publication LightStream 1010 ATM Switch Software Configuration Guide. - Page 13 ASP, which is a required system component.) Blank CAM and PAM fillers are installed in CAMs or PAM slots without CAMs or PAMs to maintain consistent airflow through the module compartment. Refer to the LightStream 1010 ATM Switch User Guide for information about installing the CAM. Figure 10...
- Page 14 All PAMs support hot-swapping. The ASP is a required system component. Removing an Caution ASP while the system is operating will cause the system to shut down. 14 LightStream 1010 ATM Switch 622 SM/MM Port Adapter Module Configuration Note...
-
Page 15: Configuring The Interfaces
Port IDs In the LightStream 1010 switch, the port ID specify the actual physical location of each PAM port on the front of the switch. (See Figure 13.) The address is composed of a three-part number in the format card/subcard/port. - Page 16 To display information about a specific interface, use the show interface command with the interface type and port address in the format show interface atm card/subcard/port. This command is described in the LightStream 1010 ATM Switch Command Reference publication.
- Page 17 “Configuring Virtual Connections” in the LightStream 1010 ATM Switch Software Configuration Guide. To test the configuration refer to the section “Confirming the Installation” in the LightStream 1010 ATM Switch User Guide. LightStream 1010 ATM Switch 622 SM/MM Port Adapter Module Configuration Note...
-
Page 18: Cisco Connection Online
This document is to be used in conjunction with the LightStream 1010 ATM Switch User Guide and the LightStream 1010 ATM Switch Command Reference publication. AtmDirector, Catalyst, CD-PAC, CiscoAdvantage, CiscoFusion, Cisco IOS, the Cisco IOS logo, CiscoLink, CiscoPro, the CiscoPro logo, CiscoRemote, the CiscoRemote logo, CiscoSecure,...