Philips widescreen flat tv 19pfl5602d 48 cm (19") lcd integrated digital with digital crystal clear (2 pages)
Summary of Contents for Philips LC07 DVB DFU
Page 3
Luxemburg Netherlands Norway Poland Portugal Slovakia Spain Sweden Switzerland This information is correct at the time of press. For updated information, see www.support.philips.com www.philips.com/support Number 0810 000205 078250145 800142840 3525 8759 09 2311 3415 0821 611655 01803 386 852 0 0800 3122 1280...
Page 4
1 W. • Power Consumption of the set can found on the type plate at the rear of the TV. • For more specifi cations of the product see the product leafl et on www.philips. com/support. Note Specifications and information are subject to change without notice.
Table of contents Introduction... 3 Important Information... 3 1.1.1 Stationary images on the TV screen ... 3 1.1.2 Electric, Magnetic and Electromagnetic Fields (“EMF”)... 3 What is digital TV?... 4 Digital or Analogue channels?... 4 Safety... 5 General... 5 Care of the screen... 5 Overview of the television keys and connectors...
Page 6
Features 25.1 Timer... 32 25.2 Parental control... 33 25.3 Child lock... 34 25.4 Active control... 34 Picture and Sound settings... 35 Smart Picture and Sound... 36 Picture formats... 37 Teletext...38 Using the TV as PC monitor 30.1 Connecting the PC... 40 30.2 Control TV settings while a PC is connected ...
• Philips is committed to develop, produce and market products that cause no adverse health effects. • Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today.
What is digital TV? Digital Television offers a far wider choice of TV viewing, free from the interference that you may experience on analogue TV. It promises to transform television viewing into a new whole experience. There is a greater selection of wide screen programmes.
Safety General Two people are required to lift and Carry a TV that weighs more than 25 kg. Improper handling of the TV can cause Serious injury. If you place the TV set on a surface, Ensure the surface is level and that it can The weight of the TV.
Overview of television keys and connectors 3.1 Side or top controls Use the side or top keys to control power, menu, volume and programme number. POWER PROGRAM MENU POWER . : to switch the TV on and off. Note: For zero power, remove the mains cord from the mains socket.
Getting started 4.1 Before you start Warning: The connections do not have to be made before hanging but the cables must be inserted into connectors of the TV. 4.2 Connect the antenna Insert the aerial plug fi rmly into the 75 Ω : aerial socket at the bottom of the TV and in the wall antenna socket.
Remote control functions Standby To set the TV to stand-by mode. To switch the TV on again, press the key once more or press the , P + / – or Note: when the TV is switched on, the last viewed mode is displayed. Sound mode Used to force programmes in Stereo and Nicam Stereo to Mono.
Page 13
Teletext (See page 38-39). Digital menu To display / exit from the digital menu (when TV is in digital mode). Confirms selection and accesses the program list in Digital mode. Volume ( + VOL – ) To turn on sound louder or quieter. Mute Turn off or on sound.
Overview of Digital main menu and sub-menus Use the key of the remote control to select Digital mode. From the digital mode, press the key to display the setup menu. Use the Î ï Í Æ keys to navigate, select and adjust menu items. Setup Favourites List 1...
Page 15
Setup Preferences Language Audio Subtitle/Teletext Subtitling Mode Subtitles for hearing impaired System Location Country Time zone Information System software Current software version Always accept new software Access restrictions Set pin code protection Maturity rating TV channels Radio stations Change pin code Basque, Catalan, Croatian, Czech, Danish, Dutch, English, Finnish, French, Gaelic, Gallegan, German, Greek, Hungarian, Italian, Norwegian, Polish,...
Page 16
Setup Installation Service lists Service setup Test reception Rearrange services View new TV channels. Listen to new Radio Stations. Add new services Search TV channels found. Radio stations found. Other services found. Store Discard Reinstall all services Search TV channels found. Radio stations found.
Switching on the TV for the first time When you switch on the TV set for the first time, a menu will appear on screen. Setup Language English Español Country Français Time Zone Italiano Magyar Service Scan Select your preferred language Press the Æ...
Understanding the information on the banner When you select a digital programme, an information banner is displayed for a few seconds at the top of the screen. 8.1 Banner description programme preset start and number symbols end time 11:00-11:45 BBC 2 Snooker channel name programme title...
Service lists Rearrange services This menu allows you to change the order the stored digital channels and radio stations. From the digital mode, press the key to display the setup menu. Use the ï key to select Installation and press Æ twice to select the Service lists menu.
Service setup 10.1 Add new services This menu allows you to search for new TV channels or radio stations that have been launched by the broadcaster after the initial installation. From the digital mode, press the key to display the setup menu. Use the ï...
Press the key to start the installation. A search is then made for all digital services which are then stored automatically. When the search is completed, the menu will indicate the number of digital services found. Press key to store the services. To return to previous menu, press the Í...
Test reception This menu allows you to check the strength of the signal you are receiving through your aerial. From the digital mode, press the key to display the setup menu. Use the ï key to select Installation and press the Æ key. Setup Installation Service lists...
Preferences This menu allows you to select your preferred language or to make changes to the location (country and time zone). From the digital mode, press the key to display the setup menu. Use the ï key to select Preferences and press Æ...
Access restrictions This menu allows you to set up the access restrictions for the digital channels. From the digital mode, press the key to display the setup menu. Use the ï key to select Access restrictions and press the Æ key. Press the Æ...
Setting up your list of favourite channels This menu enables you to create a favourite list with your preferred TV channels and radio stations. For example, each member of your family can create his/her own favourites list. From the digital mode, press the key to display the setup menu.
• If download is successful, a congratulatory message will appear. Press the accept. New software and upgrade instructions may also be obtained from the web site : www.philips.com. To return to previous menu, press the Í key. Press the key to proceed.
Using the Options menu This menu gives you direct access to the: favourites list, the language selection and some other selections. From the digital mode, press the white key to display the options menu. Options None Favourites List 1 Subtitle language List 2 Audio language List 3...
TV Guide The TV guide is an Electronic Programme Guide that provides you with a quick and easy way to view a complete list of digital programmes as you would in a newspaper or TV magazine. You can navigate through the list of digital programmes and obtain detailed information on the programmes.
Digital teletext (MHEG) Available in U.K. only Digital teletext services differ greatly from analogue teletext. When you switch to a Digital teletext service, the images you see contain graphics and text which are laid out and controlled in a manner decided by the broadcaster.
Using the Conditional Access Module (CAM) The Conditional Access Module (CAM) menu provides access to functions contained on the CAM. The module can be inserted into the Common Interface (CI) slot located at the backside (facing downwards) of the TV. Note This Common Interface (CI) module does not come with the TV set.
Automatic tuning of analogue programmes This menu allows you to automatically search for all the analogue programmes available in your region. Before you automatically search for all the analogue programmes, ensure the TV is in analogue mode. If it is in digital mode, press (Analogue / Digital) key to enter the analogue mode.
Manual tuning of analogue programmes This menu is used to store the programmes one at a time. Press the key. Press the Î ï keys repeatedly to select Install and the Æ / enter the Install menu. Main Auto Store Picture Sound Manual Store...
Programme Sort Sort feature allows you to change the programme number for a particular stations. Press the key. Press the Î / ï key repeatedly to select Install and the Æ / enter the Install menu. Main Picture Auto Store Sound Manual Store Features...
Naming of Channel If preferred, you can assign a name to the TV channel. Press the key. Press the Î / ï key repeatedly to select Install and the Æ / enter the Install menu. Main Picture Auto Store Sound Manual Store Features Sort...
Selecting your Favourite Programmes This feature allows you to skip programmes that you do not watch often and only keep your favourite programmes. Note: Once a programme is skipped, you cannot access it by the P – / + key. You can only access the programme by the Digit 0 -9 keys.
Features 25.1 Timer The Timer feature allows you to set the TV to switch to another channel at a specified time while you are watching another channel. You can also use it as an alarm to switch on the TV at a specified time from standby mode.
25.2 Parental Cont. The Parental Cont. feature allows you to lock channels to prevent your children from watching certain programmes. Press key. Press Î ï keys repeatedly to select Features and press the Æ/ enter Features menu. Main Picture Timer Sound Child Lock Parental Cont.
25.3 Child Lock The side controls of the TV will be locked when you select the On option in the Child Lock menu. The TV can still be operated by using the remote control. Press key. Press Î ï keys repeatedly until Features is selected and press Æ...
Picture and Sound settings You can adjust the picture and sound settings in the Picture and Sound menu. Press the key. Press the Î ï keys to select Picture or Sound. Press Æ / key to enter Picture or Sound menu. Picture Brightness Colour...
Smart Picture and Sound Smart Picture feature offers you a choice of 5 picture settings namely : Rich, Natural, Soft, Multimedia and Personal. Press the button repeatedly to cycle through the settings to select your desired mode. Rich Note : The Personal setting is the setting that you set up using the Picture menu in the main menu.
Picture Formats Picture formats for 4:3 screens Press the key to cycle through the different formats. This format is recommended to display the 4:3 picture using the full surface of the screen. Expand 4:3 When this format is selected, the picture is vertically expanded, thus reducing the horizontal black bars.
Teletext Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission audio language (cable networks, satellite channels, etc.).
Page 43
Hidden information To display or hide the concealed information such as solutions to games or riddles. Enlarge a page This allows you to display the top or bottom part of the page. Pressing it again will return the page to normal size. Picture/Teletext •...
Using the TV as a PC Monitor Your TV can be used as a computer monitor. Note : PC connection is only available via HDMI connector. VGA connection is not supported. 30.1 Connecting the PC equipment Important For the TV to function as a PC monitor, the following steps must be taken.
Using the TV in HD (High Definition) mode The HD (High Definition) mode allows you to enjoy clearer and sharper pictures if you are using HD equipment that can produce high definition video signals. 31.1 Connecting the HD equipment Important: For the TV to function in the HD mode, the following steps must be taken.
Features menu • The Features menu comprises Timer, Child Lock, Parental Cont., Mode Selection and Active Control features. Except for Mode Selection feature, all the other features work exactly in the same way as the TV Sound menu (see pages 34-36). 31.
SD (Standard Definition) Formats are for YPbPr connection only. Note Your Philips TV is HDMI compliant. If you do not get a good picture, please change the video format on your device (DVD player, cable set-top box, etc.) to a standard format. For example, for DVD player, select 720p, 1080i or 1080p.
Connecting other equipment 32.1 Connect VCR or DVD recorder With a Eurocable Connect the aerial cables 1 and 2 as shown. Connect the Eurocable 3 as shown. Press the key on the remote control display Source list. Press the ï key repeatedly to select EXT2 and press the Æ...
32.3 Connect 2 VCRs or VCR and DVD recorder With Eurocables Connect the aerial cables 1 , 2 and 3 as shown. Connect your VCRs or DVD-recorder to EXT1 and EXT2 with the Eurocables 4 and 5 . Press the key on the remote control to display Source list.
32.5 Connect a DVD player, Cable box or game console With a HDMI connector HDMI is the leading new standard for Digital video and audio inter-connection. Connect your equipment with the HDMI connector. Press the key on the remote control to display Source list. Press the ï...
Note • Cables are often colour coded. Connect red to red, white to white, etc.; • The labels for the component video sockets may differ depending on the DVD player connected. Although the abbreviations may vary, the letters B and R stand for the blue and red component signals, respectively, and Y indicates the luminance signal.
32.8 Connect a Camera, Camcorder, Game console Connect your camera, camcorder or game console. For mono equipment, connect to VIDEO 2 and AUDIO L 3 (only). For stereo equipment, connect both AUDIO L and AUDIO R 3 . S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS cables with the S-VIDEO input 1 and AUDIO L / R inputs 3 .
Troubleshooting Below is a list of symptoms you may encounter with your TV. Before you call for service, make these simple checks. Symptom Possible solutions • Check whether power cord is properly connected into the No display on screen • Press the •...
Page 54
Symptom No digital channels One or a few tiny spots on the screen that do not change colour along with the video picture Intermittent or flickering • Noise is displayed if the connected digital equipment such picture in HD mode No sound or picture but front panel red light is on PC modes do not...
Glossary DVI (Digital Visual Interface) : A digital interface standard created by the Digital Display Working Group (DDWG) to convert analog signals into digital signals to accommodate both analog and digital monitors. RGB signals : These are the three video signals, Red Green Blue, which make up the picture.
Page 56
Information for users in the UK (not applicable outside the UK) Positioning the TV For the best results, choose a position where light does not fall directly on the screen, and at some distance away from radiators or other sources of heat. Leave a space of at least 5 cm all around the TV for ventilation, making sure that curtains, cupboards etc.