12. TECHNICAL INFORMATION................. 18 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
Page 3
ENGLISH responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged 8 years •...
Before any maintenance operation, deactivate the • appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam • to clean the appliance. The ventilation openings in the base (if applicable) •...
ENGLISH • Do not drink and play with the water in the appliance. • Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the dishes. • The appliance can release hot steam if you open the door while a programme operates.
Rinse aid dispenser Lower basket Detergent dispenser Upper basket Cutlery basket 4. CONTROL PANEL On/off button Programme button Programme indicators Delay button Indicators 4.1 Indicators Indicator Description End indicator. Rinse aid indicator. It is always off while the programme operates.
ENGLISH Programme Degree of soil Programme Consumption values Type of load phases Duration Energy Water (min) (kWh) Normal soil • Prewash 120 - 130 1.3 - 1.6 15 - 17 Crockery and • Wash 65 °C cutlery • Rinses • Dry Fresh soil •...
Page 8
6.2 The water softener The water softener should be adjusted according to the hardness of the water in The water softener removes minerals your area. Your local water authority can from the water supply, which would have advise you on the hardness of the water a detrimental effect on the washing in your area.
ENGLISH 6.3 Acoustic signals indicator starts to flash and the indicator comes on with Acoustic signals sound when a fixed light. malfunction of the appliance occurs. It is 2. Press immediately the programme not possible to deactivate these acoustic button. signals.
5. Turn the cap of the salt container clockwise to close the salt container. CAUTION! Water and salt can come out of the salt container when CAUTION! you fill it. After you fill the Only use rinse aid salt container, immediately...
ENGLISH Starting a programme with delay start 1. Set a programme. 2. Press Delay to delay the start of the programme of 3 hours. • The indicator comes on. 3. Close the appliance door to start the countdown. When the countdown is completed, the programme starts.
If you do not deactivate the appliance within 5 minutes all indicators goes off. This helps to decrease energy consumption. 9. HINTS AND TIPS 9.1 General cleaner which is particularly suitable for this purpose. The following hints will ensure optimal •...
ENGLISH • Put hollow items (cups, glasses and • There is dishwasher salt and rinse aid pans) with the opening down. (unless you use multi- tablets). • Make sure that glasses do not touch • The position of the items in the other glasses.
7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A).
ENGLISH 11. TROUBLESHOOTING If the appliance does not start or it stops With some problems the end indicator during operation, before you contact an flashes intermittently indicating a Authorised Service Centre, check if you malfunction. can solve the problem by yourself with The majority of problems that can the help of the information in the table.
Page 16
Problem and alarm code Possible cause and solution The appliance stops and starts • It is normal. It provides optimal cleaning re‐ more times during operation. sults and energy savings. The program lasts too long. • If the delayed start option is set, cancel the delay setting or wait for the end of the countdown.
Page 17
ENGLISH Problem Possible cause and solution Poor drying results. • Tableware has been left for too long inside a closed appliance. • There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level.
Problem Possible cause and solution Limescale deposits on the • The level of salt is low, check the refill indicator. tableware, on the tub and on • The cap of the salt container is loose. the inside of the door.
Page 19
ENGLISH appliances. Do not dispose appliances your local recycling facility or contact your municipal office. marked with the symbol with the household waste. Return the product to...