13. TECHNICAL INFORMATION................. 21 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
Put knives and cutlery with sharp points in the cutlery • basket with the points down or in a horizontal position. Do not keep the appliance door open without • supervision to prevent to fall on it. Before any maintenance operation, deactivate the •...
Page 5
ENGLISH • Ensure that there are no visible water • Do not remove the dishes from the leaks during and after the first use of appliance until the programme is the appliance. completed. There can be detergent on • The water inlet hose has a safety the dishes.
ENGLISH 4. CONTROL PANEL Programs Options On/off button Start button Programs button Indicators Programme indicators Options button Display Delay button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Drying phase. It comes on when the drying phase operates. XtraDry indicator.
ENGLISH Water Energy Duration Programme (kWh) (min) 13 - 15 1.5 - 1.6 150 - 170 8 - 9 1.1 - 1.3 55 - 65 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values.
ENGLISH There is also an acoustic signal that How to deactivate the rinse aid sounds when the programme is empty notification completed. By default this acoustic signal is deactivated but it is possible to The appliance must be in programme activate it.
7.2 XtraDry How to activate XtraDry Activate this option when you want to Press Options until the indicator boost the drying performance. With the comes on. use of this option, the duration of some If the option is not applicable to the...
ENGLISH 8.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid specifically designed for dishwashers. 1. Press the release button (D) to open the lid (C). 2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'.
• The washing phase indicator comes on . • The programme duration starts to decrease with steps of 1 minute. Starting a programme with delay start 1. Set a programme. 2. Press Delay again and again until the display shows the delay time you want to set (from 1 to 24 hours).
ENGLISH appliance is in programme selection All buttons are inactive except for the mode. on/off button. Make sure that there is detergent in the 1. Press the on/off button or wait for the detergent dispenser before you start a Auto Off function to automatically new programme.
10.4 Loading the baskets • The filters are clean and correctly installed. • Only use the appliance to wash items • The cap of the salt container is tight. that are dishwasher-safe. • The spray arms are not clogged.
ENGLISH 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4.
• If you regularly use short duration • To maintain the performance of your programmes, these can leave appliance at its best, we recommend deposits of grease and limescale to use monthly a specific cleaning inside the appliance. To prevent this, product for dishwashers.
Page 19
ENGLISH Problem and alarm code Possible cause and solution The appliance does not • Make sure that the sink spigot is not clogged. drain the water. • Make sure that the filter in the outlet hose is not clog‐ ged. The display shows •...
Page 20
12.1 The washing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and basket loading leaflet. • Use more intensive washing programmes. • Clean spray arm jets and filter. Refer to "Care and Cleaning".
ENGLISH Problem Possible cause and solution There are residues of deter‐ • The detergent tablet got stuck in the dispenser and gent in the dispenser at the therefore was not completely washed away by wa‐ end of the programme. ter. •...
14. ENVIRONMENTAL CONCERNS Recycle the materials with the symbol marked with the symbol with the household waste. Return the product to . Put the packaging in applicable your local recycling facility or contact containers to recycle it. Help protect the your municipal office.