Makita BTD130F Instruction Manual
Hide thumbs
Also See for BTD130F:
- Instruction manual (49 pages) ,
- Parts list (3 pages) ,
- Instruction manual (13 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita BTD130F
Summary of Contents for Makita BTD130F
- Page 1 INSTRUCTION MANUAL Cordless Impact Driver BTD130F BTD140 BTD141 BTD142 008432 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model BTD130F BTD140 BTD141 BTD142 Machine screw 4 mm - 8 mm Capacities Standard bolt 5 mm - 14 mm High tensile bolt 5 mm - 12 mm No load speed (min 0 - 2,400 0 - 2,300... - Page 3 Do not abuse the cord. Never use the cord for Power tool use and care carrying, pulling or unplugging the power tool. 17. Do not force the power tool. Use the correct Keep cord away from heat, oil, sharp edges or power tool for your application.
- Page 4 Service Do not short the battery cartridge: 28. Have your power tool serviced by a qualified Do not touch the terminals with any repair person using only identical conductive material. replacement parts. This will ensure that the Avoid storing battery cartridge in a safety of the power tool is maintained.
-
Page 5: Functional Description
Lighting up the front lamp FUNCTIONAL DESCRIPTION 1. Lamp CAUTION: Always be sure that the tool is switched off and the • battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1. Red part 2. - Page 6 If it comes out, do not use it. (Note) Bit-piece is necessary for installing the bit. Hook 011405 For Models BTD130F,BTD140,BTD142 1. Hook To install the bit, pull the sleeve in the direction of 2. Screw the arrow and insert the bit into the sleeve as far 3.
-
Page 7: Operation
Hold the tool firmly and place the point of the driver bit OPERATION in the screw head. Apply forward pressure to the tool to the extent that the bit will not slip off the screw and turn the tool on to start operation. NOTE: Use the proper bit for the head of the screw/bolt •... -
Page 8: Maintenance
If you need any assistance for more details regarding Raise the arm part of the spring and then place it in the these accessories, ask your local Makita Service Center. recessed part of the housing with a slotted bit Screw bits screwdriver of slender shaft or the like. - Page 12 Makita Corporation www.makita.com 884617-5...