Sony DSC-T7 User Manual

Digital still camera

Hide thumbs Also See for DSC-T7:

User manual (103 pages)

Operating instructions (3 pages)

User's manual / troubleshooting (103 pages)

Table Of Contents

100

101

102

103

Table of Contents

Quick Links

Summary of Contents for Sony DSC-T7

Page 1 The model and serial numbers are located on the bottom. Using your computer Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DSC-T7 Printing still images Serial No.
Page 2 Caution: Do not handle damaged or leaking Lithium-Ion batteries. Note: Model DSC-T7 is to be used with the Interface For Customers in the U.S.A. Adaptor. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
Page 3: For Customers In Europe
Never use the using connection cables shorter than 3 meters (9.8 plug without the fuse cover. If you should lose the feet). fuse cover, please contact your nearest Sony service station. Attention “Memory Stick”...
Page 4: Notes On Using Your Camera
Notes on using your camera Types of “Memory Stick” that can be • For details on the usable battery pack, see page 92. used The IC recording medium used by this Carl Zeiss lens camera is a “Memory Stick Duo”. There are This camera is equipped with a Carl Zeiss two types of “Memory Stick”.
Page 5 The pictures used in this manual • Clean the flash surface before use. The heat of flash emission may cause dirt on the flash The photographs used as examples of pictures in surface to become discolored or to stick to the this manual are reproduced images, and are not flash surface, resulting in insufficient light actual images shot using this camera.
Page 6 For full use of the digital still camera Prepare the camera and shoot in auto adjustment mode “Read This First” (separate volume) 1 Prepare the battery pack 2 Turn the camera on/set the clock 3 Insert a “Memory Stick Duo” 4 Select the image size for use 5 Shoot images easily (Auto adjustment mode) Shoot still images (Scene Selection)
Page 7: Table Of Contents
Table of contents Notes on using your camera ..............4 Enjoying the camera Basic techniques for better images ............10 Focus – Focusing on a subject successfully........... 10 Exposure – Adjusting the light intensity ............11 Color – On the effects of lighting..............12 Quality –...
Page 8 Viewing menu ..................37 (Folder) - (Protect) DPOF (Print) (Slide) (Resize) (Rotate) (Divide) (Setup) Trimming Using the Setup screen Using Setup items ................44 Camera 1................... 45 AF Mode Digital Zoom Date/Time Red Eye Reduction AF Illuminator Auto Review Camera 2................... 48 Enlarged Icon Memory Stick Tool................
Page 9 Using your computer Enjoying your Windows computer ............54 Copying images to your computer............56 Viewing image files stored on a computer with your camera ....63 Using the supplied software ..............64 Using your Macintosh computer..............66 Printing still images How to print still images ................68 Printing images directly using a PictBridge compliant printer ....69 Printing at a shop ..................73 Connecting your camera to your TV...
Page 10: Enjoying The Camera
Enjoying the camera Basic techniques for better images Focus Exposure Color Quality This section describes the basics so you can enjoy your camera. It tells you how to use various camera functions such as the mode switch (page 24), the menus (page 26), and so Focus Focusing on a subject successfully When you press the shutter button halfway down, the camera adjusts the focus automatically...
Page 11: Exposure Adjusting The Light Intensity
Exposure Adjusting the light intensity You can create various images by adjusting the exposure and the ISO sensitivity. Exposure is the amount of light that the camera will receive when you release the shutter. Shutter speed = Length of time the camera receives Exposure: light Aperture = Size of the opening allowing light to pass...
Page 12: Color - On The Effects Of Lighting
Adjusting the ISO sensitivity ISO is unit of measurement (sensitivity), estimating how much light an image pickup device (equivalent to photo films) receives. Even when the exposure is the same, images differ depending on the ISO sensitivity. [ISO] adjusts the sensitivity t page 33 High ISO sensitivity Records a bright image even when shooting in a dark location.
Page 13: Quality On "Image Quality" And "Image Size
Quality On “image quality” and “image size” A digital image is made up of a collection of small dots called pixels. If it contains a large number of pixels, the picture becomes large, it takes up more memory, and the image is displayed in fine detail. “Image size” is shown by the number of pixels. Although you cannot see the differences on the screen of the camera, the fine detail and data processing time differ when the image is printed or displayed on a computer screen.
Page 14: Identifying Parts
Identifying parts See the pages in parentheses for details of operation. Camera A Shutter button ( step 5 in “Read This A Mode switch (24) First”) B MENU button (26) Power lamp ( step 2 in “Read This C Control button First”) Menu on: v/V/b/B/ step 2 in...
Page 15 N “Memory Stick Duo” slot (bottom) S DC IN jack step 3 in “Read This First”) For connecting an AC-LS5/AC-LS5K AC Adaptor (not supplied). O Access lamp (bottom) ( step 4 in “Read This First”) 2 To the multi connector P Screw groove (bottom) 1 To DC IN jack Interface Adaptor...
Page 16 2 Make sure to match the locking screw with the screw groove on the camera, and then turn the locking screw to secure the stand to the camera. C Locking screw D Tripod screw hole Attach the tripod here. • See the operating instructions supplied with the tripod for the method of attaching the tripod.
Page 17: Indicators On The Screen
Indicators on the screen See the pages in parentheses for details of operation. Display Indication Battery remaining ( step When shooting still images 60min 1 in “Read This First”) 60min AE/AF lock ( step 5 in “Read This First”) Recording mode (24, 33) White balance (32) STBY Standby/Recording a movie...
Page 18 Display Indication Display Indication Image size ( step 4 in Histogram (21, 29) “Read This First”) FINE 1 6 0 FINE STD Image quality (33) NR slow shutter Recording folder (49) • If you select shutter speeds of 1/6 second or slower, the Remaining “Memory NR slow shutter function Stick”...
Page 19 When playing back still images Display Indication 60min Battery remaining ( step 12/12 60min C:32:00 1 in “Read This First”) +2.0EV Image size ( step 4 in “Read This First”) F3.5 FINE 1 6 0 Recording mode (24, 33) Playback ( step 6 in BACK/NEXT VOLUME...
Page 20 Display Indication Do not disconnect the USB cable (71) +2.0EV EV level value (29) ISO number (33) Metering mode (32) Flash White balance (32) Shutter speed F3.5 Aperture value Playback image ( step 6 in “Read This First”) Display Indication Histogram (21, 29) •...
Page 21: Changing The Screen Display
Changing the screen display Each time you press the (Display on/ off) button, the display changes as follows. Histogram on 60min Histogram display S AF (page 29) Indicators off S AF Indicators on 60min S AF • When you set the histogram display to on, image information is displayed during playback.
Page 22: Number Of Still Images And Recording Time Of Movies
• Movies with the size set to [640(Fine)] can be only recorded on a “Memory Stick PRO Duo”. • For image size and image quality, see page 13. • When images recorded using earlier Sony models are played back on this camera, the display may differ from the actual image size.
Page 23: Battery Life And Number Of Images That Can Be Recorded/Viewed
Battery life and number of images that can be recorded/viewed When viewing still images The tables show the approximate number of images that can be recorded/viewed and the No. of images Battery life (min.) battery life when you shoot images in Approx.
Page 24: Using The Mode Switch
Using the mode switch Set the mode switch to the desired function. Mode switch Control button : Shooting movies step 5 in “Read This First” : Playback/Edit step 6 in “Read This First” Still image shooting modes Auto: Auto adjustment mode Allows easy shooting with the settings adjusted automatically.
Page 25 Scene Selection For details step 5 in “Read This First” For shooting an image appropriately according to the scene condition, a combination of functions is determined by the camera. ( : you can select the desired setting) AF range Exposure White Burst/Multi Macro...
Page 26: Using The Menu
Using the menu Using menu items v/V/b/B button Mode switch MENU button z button Control button Turn on the power and set the mode switch. Different items are available depending on the position of the mode switch and the (Camera) menu settings.
Page 27: Menu Items
Menu items For details on the operation page 26 The menu items available vary depending on the mode switch position. Only the available items are displayed on the screen. : available) Mode switch position: Auto Program Scene Menu for shooting (page 29) (Camera) —...
Page 28 For details on the operation page 26 Menu for viewing (page 37) (Folder) — — — — - (Protect) — — — — DPOF — — — — (Print) — — — — (Slide) — — — — (Resize) — —...
Page 29: Shooting Menu
Shooting menu For details on the operation page 26 The default settings are marked with (Camera) Select the still image camera mode. step 5 in “Read This First” (EV) Manually adjusts the exposure. Toward – Toward + +2.0EV Toward +: Brightens an image. The exposure is determined automatically by the camera.
Page 30: Focus)
For details on the operation page 26 9 (Focus) You can change the focus method. Use the menu when it is difficult to get the proper focus in auto focus mode. (unlimited distance) Focuses on the subject using a previously set distance to the subject.
Page 31 For details on the operation page 26 • When you use [Digital Zoom] or [AF Illuminator], priority AF movement is given to subjects in or near the center of the frame. In this case the indicator flashes and the AF range finder frame is not displayed.
Page 32 For details on the operation page 26 (Metering Mode) Selects the metering mode that sets which part of the subject to measure to determine the exposure. Spot (Spot metering) Measures only a part of the subject. • This function is useful when the subject is backlit or when there is strong contrast between the subject and the background.
Page 33 For details on the operation page 26 Selects a luminous sensitivity with units of ISO. The larger the number, the higher the sensitivity. Select a large number when shooting in dark locations or shooting a subject moving at high speed, or select a small number to obtain high image quality.
Page 34 For details on the operation page 26 On the [Multi Burst] • You can play back images shot with [Multi Burst] using the following procedure. – To pause/resume: Press z on the control button. – To play back frame-by-frame: Press b/B in pause mode. Press z to resume playback in series. •...
Page 35 For details on the operation page 26 BRK (Bracket Step) ±1.0EV Shifts the exposure value by plus or minus 1.0EV. ±0.7EV Shifts the exposure value by plus or minus 0.7EV. ±0.3EV Shifts the exposure value by plus or minus 0.3EV. •...
Page 36 For details on the operation page 26 (Saturation) Adjusts the saturation of the image. Toward +: Brightens the color. Normal – ( Toward –: Darkens the color. (Contrast) Adjusts the contrast of the image. Toward +: Enhances the contrast. Normal –...
Page 37: Viewing Menu
Viewing menu For details on the operation page 26 The default settings are marked with (Folder) Selects the folder containing the image you want to play back. See the following procedure. Cancel Cancels the selection. 1 Select the desired folder with b/B on the control button. Select Folder Folder Name: 102MSDCF...
Page 38 For details on the operation page 26 - (Protect) Protects images against accidental erasure. Protect (-) See the following procedure. Exit Exits the Protection function. To protect images in single-image mode 1 Display the image you want to protect. 2 Press MENU to display the menu. 3 Select [-] (Protect) with b/B on the control button, then press z.
Page 39: Dpof
For details on the operation page 26 To cancel the protection In single-image mode Press in step 3 or 4 of “To protect images in single-image mode.” In index mode To protect images in 1 Select the image for which you want to remove protection in step of “...
Page 40 For details on the operation page 26 Image Folder Plays back all images in the selected folder. Plays back all images stored on the “Memory Stick Duo”. Repeat Plays back images in a continuous loop. After all the images have been played back, the slide show ends.
Page 41 For details on the operation page 26 (Rotate) Rotates a still image. Rotates an image. See the following procedure. Determines the rotation. See the following procedure. Cancel Cancels rotation. 1 Display the image to be rotated. 2 Press MENU to display the menu. ] (Rotate) with b/B on the control button, then press z.
Page 42 For details on the operation page 26 Example: Cutting a movie numbered 101_0002 This section describes an example of dividing a movie numbered 101_0002 and deleting it in the following file configuration. 101_0001 101_0003 101_0002 1 Cutting scene A. 101_0002 Divide 101_0002 is divided into 101_0004 and 101_0005.
Page 43: Trimming
For details on the operation page 26 5 Press z at the desired cutting point. 60min Divide 00:00:02 Dividing Point Cancel Exit • When you want to adjust the cutting point, select [c/C] (frame rewind/forward) and adjust the cutting point using b/B. •...
Page 44: Using The Setup Screen
Using the Setup screen Using Setup items You can change the default settings using the Setup screen. v/V/b/B button Mode switch MENU button z button Control button Turn on the power. Press MENU to display the menu. Press B on the control button to select (Setup).
Page 45: Camera 1
Camera 1 For details on the operation page 44 The default settings are marked with AF Mode Selects the auto focus operation mode. Single (S AF) Automatically adjusts the focus when the shutter button is pressed and held halfway down. This mode is useful for shooting stationary subjects.
Page 46: Date/Time
For details on the operation page 44 • The maximum zoom scale of smart zoom/precision zoom includes the scale of the optical zoom. • The AF range finder frame does not appear when using the digital zoom. The indicator flashes, and AF operates with priority on subjects located near the center of the frame. •...
Page 47: Af Illuminator
For details on the operation page 44 AF Illuminator The AF illuminator supplies fill light to focus more easily on a subject in dark surroundings. The AF illuminator emits red light allowing the camera to focus easily when the shutter button is pressed halfway, until the focus is locked.
Page 48: Camera 2
Camera 2 For details on the operation page 44 The default settings are marked with Enlarged Icon Enlarges the setting indicator temporarily when you press (Flash mode), (Self-timer), or (Macro). Enlarges the indicators. Does not enlarge the indicators. Downloaded from ManualsCamera.com Manuals...
Page 49: Memory Stick Tool
Memory Stick Tool For details on the operation page 44 The default settings are marked with Format Formats the “Memory Stick Duo”. The supplied or a commercially available “Memory Stick Duo” is already formatted, and can be used immediately. • Note that formatting irrevocably erases all data on a “Memory Stick Duo”, including even protected images.
Page 50: Change Rec. Folder
For details on the operation page 44 Change REC. Folder Changes the folder currently used for recording images. See the following procedure. Cancel Cancels changing the recording folder. 1 Select [OK] with v on the control button, then press z. The folder selection screen appears.
Page 51: Setup 1
Setup 1 For details on the operation page 44 The default settings are marked with LCD Backlight Selects the brightness of the LCD backlight when using the camera with battery pack. Bright Brightens. Normal • Selecting [Bright] uses up the battery charge faster. Beep Selects the sound produced when you operate the camera.
Page 52: Setup 2
Setup 2 For details on the operation page 44 The default settings are marked with File Number Selects the method used to assign file numbers to images. Series Assigns numbers to files in sequence even if the recording folder or the “Memory Stick Duo” is changed. (When the replaced “Memory Stick Duo”...
Page 53: Clock Set
For details on the operation page 44 Clock Set Sets the date and time. Select [OK] with v on the control button, and press z. Then, perform the procedure explained in “Set the clock” ( step 2 in “Read This First”). Cancel Cancels setting the clock.
Page 54: Enjoying Your Windows Computer
Using your computer Enjoying your Windows computer For details on using a Macintosh computer, refer to “Using your Macintosh computer” (page 66). Copying images to your computer (page 56) Preparation Viewing images on your Installing the USB driver. computer • Installation of the USB driver is not needed when using Windows Enjoying images using “PicturePackage”...
Page 55: Recommended Computer
• A separate software application for operating Recommended computer the recording device is required in order to write environment to CD-Rs. The following environment is Notes on connecting your camera to a recommended for a computer connected to computer the camera. •...
Page 56: Copying Images To Your Computer
Copying images to your computer This section describes the process using a Windows computer as an example. Insert the CD-ROM into the You can copy images from the camera to computer, then click [USB Driver] your computer as follows. when the install menu screen appears.
Page 57 Stage 2: Preparing the camera Set the mode switch to , then and the computer turn on the camera and the computer. Insert a “Memory Stick Duo” with recorded images into the camera. Insert the sufficiently charged battery pack in the camera, or connect the camera to a wall outlet (wall socket) with the AC Adaptor (not supplied).
Page 58 “USB Mode Normal” appears on the screen Stage 3: Connecting the camera of the camera. and your computer Connect the Interface Adaptor (page 15). USB Mode Normal 3 To the multi connector Access indicators* 2 To the (USB) Switch on MENU jack When a USB connection is established for...
Page 59 After making a USB connection in Select a name and destination for Stage 3, click [Copy pictures to a the images, then click [Next]. folder on my computer using Microsoft Scanner and Camera Wizard] [OK] as the wizard screen appears automatically on the desktop.
Page 60 Click [Finish]. Double-click the folder where the image files you want to copy are The wizard screen closes. stored. • To continue copying other images, Then, right-click an image file to disconnect the USB cable (page 61) and display the menu and click reconnect it.
Page 61 Double-click here The contents of the “My Documents” folder are displayed. 2 Click (Sony DSC) [Stop]. • If you are not using Windows XP, double-click [My Documents] on the 3 Confirm the device on the confirmation desktop.
Page 62: Image File Storage Destinations And File Names
x For Windows 98/98SE • You cannot record any images to the “100MSDCF” or “MSSONY” folders. The 1 Confirm that the access indicators (page images in these folders are available only for 58) are white. viewing. • For more information about folders, see pages 2 Disconnect the USB cable, remove the 37, 49.
Page 63: Viewing Image Files Stored On A Computer With Your Camera
“Memory Stick Duo”. [Copy]. 2Double-click [Removable Disk] or • Step 1 is not necessary if the file name set with [Sony MemoryStick] in [My your camera has not been changed. Computer]. • You may be unable to play back some images 3Right-click the [sssMSDCF] folder depending on the image size.
Page 64: Using The Supplied Software
Using the supplied software This section describes the process using a Windows computer as an example. Turn on your computer, and insert the CD-ROM (supplied) into the CD-ROM drive. Overview of the supplied software The installation menu screen appears. • If it does not appear, double-click The supplied CD-ROM contains two Computer) (PICTUREPACKAGE)
Page 65 Remove the CD-ROM as the shortcut icons of “PicturePackage Menu” and “PicturePackage destination Folder” are displayed after the installation. To start up the software Double-click the “PicturePackage Menu” • icon on the desktop. For information on the use of the software Click [?] at the upper-right corner of each screen to show the on-line help.
Page 66: Using Your Macintosh Computer
Using your Macintosh computer You can copy images to your computer and • When your computer resumes from the suspend or sleep mode, communication between your create a video CD using “ImageMixer camera and your computer may not recover at VCD2”...
Page 67 To disconnect the USB cable/ remove 6 After the user information screen appears, enter the desired name and password. the “Memory Stick Duo”/ turn off the The installation of the software starts. camera Drag and drop the drive icon or the icon of To start up “ImageMixer VCD2”...
Page 68: Printing Still Images
Printing still images How to print still images Printing directly using a PictBridge compliant printer (page 69) You can print images by connecting the camera directly to a PictBridge compliant printer. Printing directly using a “Memory Stick” compliant printer You can print images with a “Memory Stick” compliant printer. For details, see the operating instructions supplied with the printer.
Page 69: Printing Images Directly Using A Pictbridge Compliant Printer
Printing images directly using a PictBridge compliant printer Even if you do not have a computer, you Stage 1: Preparing the camera can print images shot using your camera by connecting the camera directly to a Prepare the camera to connect it to the PictBridge compliant printer.
Page 70 Turn on your camera and the Stage 2: Connecting the camera printer. to the printer After the connection is made, Connect the Interface Adaptor (page 15). indicator appears 3 To the multi connector Print 2 To the (USB) All In jack This Folder DPOF image...
Page 71 [This image] Select [OK] with V/B, then press Prints a displayed image. • If you select [This image] and set [Index] to [On] in step 2, you can print a set of the The image is printed. same images as an index image. •...
Page 72 [Select] Selects images and prints all the selected images. Select the image you want to print with v/ V/b/B, then press z to display the mark. (Repeat this procedure to select other images.) Then, press MENU. [DPOF image] Prints all the images with a (Print order) mark regardless of the displayed image.
Page 73: Printing At A Shop
Printing at a shop You can take a “Memory Stick Duo” Marking in single-image mode containing images shot with your camera to a photo printing service shop. As long as the shop supports photo printing services MENU button conforming to the DPOF, you can make a (Print order) mark on images in advance so that you do not need to reselect them when you print them out at the shop.
Page 74 To cancel, select [Cancel] in step 4 or select Marking in index mode [Exit] in step 8, then press z. To remove the mark in index mode Display the index screen. ( step Select the images from which you want to 6 in “Read This First”) remove the mark in step 5, then press z.
Page 75: Connecting Your Camera To Your Tv
Connecting your camera to your TV Viewing images on a TV screen You can view images on a TV screen by connecting the camera to a TV. Set the mode switch to , and turn on the camera. Turn off both your camera and the TV before connecting the camera and the TV 60min with the A/V cable.
Page 76 On TV color systems If you want to view images on a TV screen, you need a TV with a video input jack and the A/V cable (supplied). The color system of the TV must match that of your digital still camera.
Page 77: Troubleshooting
2 Remove the battery pack, and insert the battery pack again after about one minute, and turn on the power. 3 Initialize the settings (page 51). 4 Consult your Sony dealer or local authorized Sony service facility. Downloaded from ManualsCamera.com Manuals...
Page 78: Battery Pack And Power
Battery pack and power The battery pack cannot be installed. As you insert the battery pack, use the tip of the battery pack to push the battery eject lever • toward the top of the camera ( step 1 in “Read This First”). Install the battery pack correctly ( step 1 in “Read This First”).
Page 79 Shooting still images/movies Your camera cannot record images. Check the free capacity of the “Memory Stick Duo” (page 22). If it is full, do one of the • following: Delete unnecessary images ( step 6 in “Read This First”) – Change the “Memory Stick Duo”.
Page 80 Smart zoom does not function. Set [Digital Zoom] to [Smart] (page 45). • This function cannot be used when: • The image size is set to [5M] or [3:2]. – Shooting in [Multi Burst] mode. – Shooting movies. – The flash does not work. The flash is set to (No flash) ( step 5 in “Read This First”).
Page 81: Viewing Images
The image colors are not correct. Picture Effect function is activated. Cancel the Picture Effect function (page 35). • Noise appears in the image when you view the screen in a dark place. The camera is attempting to increase the visibility of the screen by temporarily brightening •...
Page 82 Deleting/Editing images Your camera cannot delete an image. Cancel the protection (page 39). • You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to • the LOCK position. Set the switch to the recording position (page 90). You have deleted an image by mistake.
Page 83 [Device Manager]. For Windows 98/98SE/Me, click the [Device Manager] tab. • The “Device Manager” appears. 3 Right-click [ Sony DSC], then click [Uninstall] [OK]. The device is deleted. 4 Install the USB driver (page 56). You cannot copy images. Connect the camera and your computer correctly using the supplied USB cable (page 58).
Page 84: Memory Stick Duo
Images once copied to a computer cannot be viewed on the camera. Copy them to a folder recognized by the camera, such as “101MSDCF” (page 62). • Operate correctly (page 63). • “Memory Stick Duo” Cannot insert a “Memory Stick Duo”. Insert it in the correct direction ( step 3 in “Read This First”).
Page 85 Cannot print images. Check that the camera and the printer are properly connected using the USB cable. • Turn on the printer. For further information, refer to the operating instructions supplied with • the printer. If you select [Exit] during printing, images may not print. Disconnect and connect the USB •...
Page 86 Others Your camera does not work. Use the type of battery pack you can use with this camera (page 92). • The battery level is low (The E indicator appears). Charge the battery pack ( step 1 in • “Read This First”). The power is on, but the camera does not work.
Page 87: Warning Indicators And Messages
1 in “Read This after trying the following corrective actions First”). Depending on the conditions of a few times, contact your Sony dealer or use or the type of battery, the indicator local authorized Sony service facility. may flash even though there are still 5 to 10 minutes of remaining battery time left.
Page 88 Memory Stick locked File protect You are using the “Memory Stick Duo” Release the protection (page 39). • • with the write-protect switch, and the switch is set to the LOCK position. Set Image size over the switch to the recording position (page 90).
Page 89 Enable printer to connect Processing [USB Connect] is set to [PictBridge], The printer is canceling the current print • • however the camera is connected to a job. You cannot print until it is finished. non-PictBridge compliant device. This may take time, depending on the Check the device.
Page 90: On The "Memory Stick
Others On the “Memory Stick” Notes on using a “Memory Stick Duo” A “Memory Stick” is a compact, portable IC recording medium. The types of (supplied) “Memory Stick” that can be used with this • You cannot record, edit or delete images if you camera are listed in the table below.
Page 91 • Do not leave the “Memory Stick Duo” within the reach of small children. They might accidentally swallow it. • Do not use or store the “Memory Stick Duo” under the following conditions: – High temperature locations such as the hot interior of a car parked in direct sunlight –...
Page 92: On The "Infolithium" Battery Pack
On the “InfoLITHIUM” battery pack On the remaining battery time This camera requires an “InfoLITHIUM” battery pack (E type). indicator The power may go off although the battery remaining indicator shows there is enough power to operate. Use the battery pack up and charge the battery pack fully again so that the indication on the battery remaining indicator is correct.
Page 93: On The Battery Charger
On the battery charger On the battery charger • Do not charge any other battery pack except Sony “InfoLITHIUM” battery pack in the battery charger supplied with your camera. Batteries other than the specified kind may leak, overheat, or explode if you attempt to charge them, posing a risk of injury from electrocution and burns.
Page 94: Precautions
Precautions Do not leave the camera in the On operating temperatures following places Your camera is designed for use under the temperatures between 0°C and 40°C (32°F and • In an extremely hot place 104°F). Shooting in extremely cold or hot places In places such as in a car parked in the sun, the that exceed this range is not recommended.
Page 95 On the internal rechargeable battery This camera has an internal rechargeable battery for maintaining the date and time and other settings regardless of whether the power is on or off. This rechargeable battery is continually charged as long as you are using the camera. However, if you use the camera for only short periods, it discharges gradually, and if you do not use the camera at all for about one month it becomes...
Page 96: Specifications
Specifications Camera [Power, general] Power Rechargeable battery pack NP- [System] FE1, 3.6 V Image device 7.17 mm (1/2.5 type) color AC-LS5/AC-LS5K AC Adaptor CCD, Primary color filter (not supplied), 4.2 V Total pixel number of camera Power consumption (during shooting) Approx.
Page 97 BC-CS3 battery charger Power requirements AC 100 to 240 V, 50/60 Hz, 3.2 W Output voltage DC 4.2 V, 500 mA Operating temperature 0°C to +40°C (+32°F to +104°F) Storage temperature –20°C to +60°C (–4°F to +140°F) Dimensions Approx. 66×23×91 mm (2 5/8×29/32×3 5/8 inches) (W/H/D) Mass...
Page 98: Index
Index Index Beep ........51 t step 5 in “Read This A/V cable......75 Date ........46 First” AC Adaptor......15 Date/Time......46 Blur ........10 t step 1 in “Read This Day&Time......46 Burst........33 First” Daylight........ 32 AC plug adaptor DC IN jack ......
Page 99 Focus.......10, 30 Multi AF .......30 Focus preset ......30 Multi Burst......33 JPG ........62 Folder........37 Multi-pattern metering..32 Changing .......50 Multipoint AF .......30 Creating ......49 Landscape mode t step 5 in “Read This Forced flash First” t step 5 in “Read This Neck strap First”...
Page 100 Protect........38 Sharpness ......36 PTP ........52 Shooting Underexposure...... 11 Movie USB cable....... 58, 70 t step 5 in “Read This USB Connect......52 First” Quick Review USB Driver......56 Still image t step 5 in “Read This t step 5 in “Read This Using your camera abroad First”...
Page 101 , “Memory Stick PRO Duo”, , “MagicGate”, are trademarks of Sony Corporation. • “InfoLITHIUM” is a trademark of Sony Corporation. • PicturePackage is a trademark of Sony Corporation. • Microsoft, Windows, Windows Media, and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Page 102 Downloaded from ManualsCamera.com Manuals...
Page 103 Downloaded from ManualsCamera.com Manuals...

Sony DSC-T7 User Manual

Using the Menu

Using the Setup Screen

Using Your Computer

Printing Still Images

Connecting Your Camera to Your TV

Troubleshooting

Index

Quick Links

Related Manuals for Sony DSC-T7

Summary of Contents for Sony DSC-T7

Table of Contents