hit counter script
Sony HCD-RX80 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Stereo System
  5. HCD-RX80
  6. Service manual
Sony HCD-RX80 Service Manual

Sony HCD-RX80 Service Manual

Mini hi-fi component system
Hide thumbs
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
HCD-RX80 is the tuner, deck, CD and
amplifier section in MHC-RX80.
*
Dolby noise reduction manufactured
under license from Dolby Laboratories
Licensing corporation.
"DOLBY" and the double-D symbol a
are trademarks of Dolby Laboratories
Licensing Corporation.
Amplifier section
DIN power output
40 + 40 watts
(6 ohms, at 1 kHz, DIN)
Continuous RMS power output
55 + 55 watts
(6 ohms at 1 kHz,
10 % THD)
Music power output 95 + 95 watts
(6 ohms at 1 kHz, 10%
THD)
Inputs
VIDEO/MD IN (phono
jacks): voltage 250 mV,
impedance 47 kilohms
MIX MIC (phone jack):
sensitivity 1 mV, impedance
10 kilohms
Outputs
VIDEO/MD OUT (phono
jacks): voltage 250 mV,
impedance 1 kilohms
PHONES (stereo phone
jack): accepts head phones
of 8 ohms or more.
SPEAKER: accepts
impedance of 8 to 16 ohms.
SURROUND SPEAKER
accepts impedance of 16
ohms.
MICROFILM
HCD-RX80
CD
Section
Tape deck
Section

SPECIFICATIONS

CD Player section
System
Compact disc and digital
audio system
Laser
Semiconductor laser
(λ =780 nm)
Emission duration:
continuous
Laser output
Max. 44.6 µW*
* This output is the value
measured at a distance of
200 mm from the objective
lens surface on the Optical
Pick-up Block with 7 mm
aperture.
Frequency response 2 Hz – 20 kHz (± 0.5 dB)
Wavelength
780 – 790 nm
Signal-to-noise ratio More than 90 dB
Dynamic range
More than 90 dB
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength
600 nm
Output Level
– 18 dBm
MINI Hi-Fi COMPONENT SYSTEM
Model Name Using Similar Mechanism
CD Mechanism Type
Optical Pick-up Name
Model Name Using Similar Mechanism
Tape Transport Mechanism Type
Tape player section
Recording system
Frequency response 60 – 13,000 Hz (± 3 dB),
(DOLBY NR OFF) using Sony TYPE I
Wow and flutter
AEP Model
UK Model
HCD-RX70
CDM38L-5BD29AL
BU-5BD29AL
KSS-213D/Q-NP
HCD-H881
TCM-220WR2
4-track 2-channel stereo
cassette
60 – 14,000 Hz (± 3dB),
using Sony TYPE II
cassette
± 0.15% W. Peak (IEC)
0.1% W. RMS (NAB)
± 0.2 % W. Peak (DIN)
– Continued on next page –

Advertisement

Table of Contents
loading

Related Manuals for Sony HCD-RX80

Summary of Contents for Sony HCD-RX80

  • Page 1 HCD-RX80 SERVICE MANUAL AEP Model UK Model HCD-RX80 is the tuner, deck, CD and amplifier section in MHC-RX80. Dolby noise reduction manufactured Model Name Using Similar Mechanism HCD-RX70 under license from Dolby Laboratories Licensing corporation. CD Mechanism Type CDM38L-5BD29AL "DOLBY" and the double-D symbol a...

  • Page 2: General

    Approx. 280 × 330 × 366 mm Dimension (w/h/d) Mass Approx. 8.1 kg Supplied accessories: AM loop aerial (1) Remote RM-SD70 (1) Sony SUM-3 (NS) batteries (2) FM lead aerial (1) Speaker cords (4) Design and specifications are subject to change without notice. – 2 –...
  • Page 3 LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB- LISHED BY SONY.

  • Page 4: Table Of Contents

    TABLE OF CONTENTS SERVICING NOTES NOTES ON HANDLING THE OPTICAL PICK-UP Servicing Notes ................4 BLOCK OR BASE UNIT The laser diode in the optical pick-up block may suffer electrostatic GENERAL ..............5 break-down because of the potential difference generated by the charged electrostatic load, etc.
  • Page 5 SECTION 1 This section is extracted from instruction manual. GENERAL – 5 –...
  • Page 6 – 6 –...
  • Page 7 – 7 –...
  • Page 8 – 8 –...
  • Page 9 – 9 –...
  • Page 10 – 10 –...
  • Page 11 – 11 –...
  • Page 12 – 12 –...
  • Page 13 – 13 –...
  • Page 14 – 14 –...
  • Page 15 – 15 –...
  • Page 16 – 16 –...
  • Page 17 – 17 –...
  • Page 18 – 18 –...
  • Page 19 – 19 –...
  • Page 20 – 20 –...
  • Page 21 – 21 –...
  • Page 22 SECTION 2 DISASSEMBLY • This set can be disassembled in the order shown below. FRONT PANEL OPTICAL CD MECHANISM CASE BASE UNIT BD BOARD PICK-UP SECTION DECK SECTION (Page 24) (Page 26) (Page 22) (Page 22) (Page 23) (Page 26) MAIN BOARD (Page 24) SLED...
  • Page 23 CD MECHANISM DECK SECTION 1 two connectors (CN203, 204) 3 two screws (BVTP 3 × 8) 2 flat wire 4 CD mechanism deck section (CN202) Note: The CD mechanism deck will fall if three screws are removed. Support it by hand, then remove three screws.
  • Page 24 BASE UNIT 2 boss 1 two yoke bracket 3 base unit MAIN BOARD 3 four screws (BVTP 3 × 8) 1 connector (CN901) 2 flat wire (CN201) IC201 5 main board 3 two screws (BVTP 3 × 8) 4 connector (CN101) –...
  • Page 25 TRAY SECTION claw A claw B 3 flat wire (CN705) flat wire Note: When installing the tray, pull around the flat 4 two claws wire to pass through the claw A and claw B , as shown in the figure. 2 Pull the tray.
  • Page 26 BD BOARD 1 two screws 1 two screws (PTPWH M2.6 × 6) (PTPWH M2.6 × 6) 2 optical pick-up section 3 two springs 3 two springs 5 screw 4 flat wire (BVTP 2.6 × 8) (CN101) 6 Removal 7 BD board the four solders.
  • Page 27 AUDIO BOARD 1 connector 2 two rivets (CN651) 4 four screws (BTP 2.6 × 4) 3 Break the soldering of two flexible flat cables. 5 AUDIO board CAPSTAN MOTOR 4 Removal the capstan motor to direction of the arrow. 2 two screws (BTP 2.6 ×...

  • Page 28: Test Mode

    SECTION 3 TEST MODE [MC Cold Reset] [Change-over of AM Tuner Step between 9kHz and 10kHz] • The cold reset clears all data including preset data stored in the • A step of AM channels can be changed over between 9kHz and RAM to initial conditions.
  • Page 29 7. In the aging mode, the aging is executed in a sequence given [Aging Mode] in “2-2. Operation during Aging Mode”. This mode can be used for operation check of CD section and tape The aging continues unless an alarm occurred. deck section.

  • Page 30: Mechanical Adjustments

    SECTION 4 SECTION 5 MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS PRECAUTION DECK SECTION 0 dB=0.775 V 1. Clean the following parts with a denatured-alcohol-moistened swab: 1. Demagnetize the record/playback head with a head demagne- record/playback head pinch roller tizer. (Do not bring the head demagnetizer close to the erase erase head rubber belts head.)
  • Page 31 2. Turn the adjustment screw and check output peaks. If the peaks Tape Speed Adjustment DECK A do not match for L-CH and R-CH, turn the adjustment screw Note: Start the Tape Speed adjustment as below after setting to the so that outputs match within 1dB of peak.
  • Page 32 Adjustment Location: Main board Record bias Current Adjustment DECK B Procedure: [MAIN BOARD] (Component Side) 1. Mode: Record Pin 6 (L-CH) of IC1501 on the main board. RV1501 Pin #¶ (L-CH) of IC1501 on the main board.  1) 315 Hz IC1501 ...

  • Page 33: Tuner Section

    TUNER SECTION 0 dB=1 µV Note: As a front-end (FE1) is difficult to repair if faulty, replace it with new one. AM Section Adjustment Setting: loop antenna loop antenna (Supplied accessories) AM RF SSG 30% amplitude modulation by AM ANTENNA 60 cm 400 Hz signal terminal (TM1)
  • Page 34 FM Polar Adjustment (EE, CIS model only) Procedure : 1. Set the modulation of FM RF SSG to AUDIO 1 kHz, 10 kHz deviation according to "Connection 1". Connection 1: 2. Tune the set to 69 MHZ. FM RF SSG 3.

  • Page 35: Cd Section

    S Curve Check CD SECTION oscilloscope Note: 1. CD Block is basically designed to operate without adjustment. BD board Therefore, check each item in order given. TP (FEO) 2. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated. TP (VC) – 3. Use an oscilloscope with more than 10M impedance. 4.
  • Page 36 Adjustment Location: E-F Balance (1 Track Jump) check (Without remote commander) [BD BOARD] (Conductor Side) oscilloscope BD board TP (TEO) TP (VC) – IC101 Procedure: 1. Connect oscilloscope to test point TP (TEO) on BD board. 2. Turned Power switch on. 3.
  • Page 37 SECTION 6 DIAGRAMS • Circuit Boards Location TRANS board TCB board DECO board CD SW board PANEL board HP/MIC board MAIN board TC SW board POWER AMP board SENSOR board MOTOR (TURN) board CONNECTOR board MOTOR board BD board MOTOR (SLIDE) board AUDIO board LEAF SWITCH board –...
  • Page 40 • Waveforms 1 IC101 #£ pin (RF_O) 6 IC103 ^™ pin (RFCK) 1.3 ± 0.3 Vp-p 5.6 V 135.5 µ sec 7 IC103 &¢ pin (WFCK) 2 IC101 2 pin (FEI) 5.6 V 0.1 V 135.5 µ sec 3 IC101 $¶ pin (TEI) 8 IC103 *ª...

  • Page 52: Ic Block Diagrams

    • IC Block Diagrams IC21 LC72130 (TCB BOARD) PHASE DETECTOR CHARGE PUMP UNLOCK POWER DETECTOR RESET REFERENCE SWALLOW COUNTER DIVIDER 1/16, 1/17 4BITS 12BITS PROGRAMMABLE DRIVER UNIVERSAL DATA SHIFT REGISTER LATCH COUNTER 3 4 5 6 IC41 LA1835 (TCB BOARD) 17 16 DECODER RF.
  • Page 53 IC1701 IR3R42 (TCB BOARD) 19 18 14 13 PHASE COMPARATOR PHASE PHASE COMPARATOR 2 TRIGGER WAVEFORM SEP. REGULATOR SAMPLE GATE & HOLD MUTE BUFFER IC1702 MC14053BCP (TCB BOARD) B.COM OPEN A.COM C.COM OPEN OPEN – 77 –...
  • Page 54 IC101 CXA1992AR (BD BOARD) – RF SUMMING PD2 IV PD1 IV FE_BIAS SENS2 ↓ SENS1 – LASER POWER CONTROL F IV AMP FE AMP – C. OUT E IV AMP – DFCT XRST – LEVEL S DATA FO. BIAS WINDOW MIRR COMP.
  • Page 55 IC102 BA5941FP-E2 (BD BOARD) – + – + – LEVEL SHIFT LEVEL SHIFT LEVEL SHIFT – LEVEL SHIFT – + – + – – – MUTE IC103 CXD2519Q (BD BOARD) 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 LRCK AVSS WDCK...
  • Page 56 IC281 µPC1237HA (MAIN BOARD) IC801 BA6286N (MOTOR (SLIDE) BOARD) OVER LOAD DET POWER SAVE MUTE OFFSET DET VREF OUT2 LATCH/ AUTORESET CONTROL LOGIC AC OFF OUT1 IC602 µPC1330HA (AUDIO BOARD) INVERTER COMPARATER SW P1 CONT GND SW P2 GND SW R1 GND SW R2 IC701 M54641L...
  • Page 57 IC901 LA5617 (MAIN BOARD) CURRENT CURRENT START ON/OFF ON/OFF LIMITER LIMITER CIRCUIT VREF VMUTE OVER HEAT PROTECT VREF ERROR VREF ~ _ 1.8V ERROR IC1502 LB1641 (MAIN BOARD) T.S.D O.C.P MOTOR MOTOR DRIVE DRIVE FWD/REV/STOP CONTROL LOGIC – 81 –...

  • Page 58: Ic Pin Function Description

    6-15. IC PIN FUNCTION DESCRIPTION MAIN BOARD IC301 µPD780018YGF-015-3BA (MASTER CONTROL) Pin No. Pin Name Function TA-MUTE Line mute signal output DBFB-H/L DBFB H/L select signal output 427-LAT Latch signal output for IC201 (M62427FP) K-CON-LAT Not used K-CON-ON F-RELAY Front speaker relay control output R-RELAY Not used PL-RELAY...
  • Page 59 Pin No. Pin Name Function COM-CLK Common serial clock output CD-POWER CD power on signal output CD-DATA CD data output CD-CLK CD clock output MSM-CND Not used MSM-BUSY Connected ground MSM-LAT MSM-NAR Not used MSM-CH INPUT-CHANGE GAIN control output 1IC-DATA Data output for IC601 1IC-CLK Clock output for IC601...
  • Page 60 Pin No. Pin Name Function EQ-H/N Equalizer H/N select output BIAS Bias ON/OFF signal output REC-MUTE REC mute ON/OFF selection output NR-ON/OFF NR ON/OFF signal output R/P-PASS REC/PB/PASS selection output TC-MUTE TC mute ON/OFF selection output A-PLAY-SW Deck A play detect B-PLAY-SW Deck B play detect RELAY...
  • Page 61 PANEL BOARD IC601 TMP87CH75F-6543 (GRAPHIC CONTROL) Pin No. Pin Name Function SEG-35 Fluorescent display tube segment signal output V-LOAD – –30V for Fluorescent display tube 3-10 LED1-LED8 LED driver output – Ground X-OUT X'tal (8MHz) X-IN X'tal (8MHz) RESET Reset signal input from master control 15, 16 LED9, LED10 LED driver output TEST...

  • Page 62: Exploded Views

    1-769-947-11 WIRE (FLAT TYPE) (11 CORE) 4-991-701-21 PANEL, LOADING (METALLIC) (EE, CIS) 4-990-130-01 SPRING (OPEN B) 4-986-859-31 WINDOW (CD) 4-962-708-11 EMBLEM (4-A), SONY 3-354-957-01 JOINT (LOCK LEVER) * 18 3-354-954-01 LEVER (LOCK LEVER R) 4-986-843-01 BUTTON (EJECT) (BLACK) (EXCEPT EE, CIS)
  • Page 63 (2) FRONT PANEL SECTION not supplied supplied with S602 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-986-877-01 KNOB (VOL) (BLACK) (EXCEPT EE, CIS) * 69 A-4392-350-A TC SW BOARD, COMPLETE 4-986-877-21 KNOB (VOL) (METALLIC) (EE, CIS) * 70 4-986-880-01 HOLDER (JOG) 4-986-869-01 WINDOW (STR) (BLACK) (EXCEPT EE, CIS)
  • Page 64 (3) CHASSIS SECTION CDM38L-5BD29AL not supplied AEP, AED, EE, CIS, G T901 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark * 101 A-4392-331-A POWER AMP BOARD, COMPLETE 1-773-012-11 WIRE (FLAT TYPE) (15 CORE) * 102 1-664-004-11 TRANS BOARD * 109 4-988-533-01 HOLDER, PCB...
  • Page 65 (4) CD MECHANISM DECK SECTION-1 (CDM38L-5BD29AL) M701 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-917-583-21 BRACKET, YOKE 4-977-941-01 BEARING (WORM) 4-977-945-01 TRAY (TURN) * 209 1-658-576-11 SENSOR BOARD X-4946-665-1 SHAFT ASSY, WORM 4-934-376-01 SHAFT (ROLLER) 4-977-943-01 BELT (TURN) (1.2) 4-977-944-01 TRAY (SLIDE) 4-977-956-01 WHEEL, WORM...
  • Page 66 (5) CD MECHANISM DECK SECTION-2 (CDM38L-5BD29AL) M801 BU-5BD29AL S811 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-917-583-71 BRACKET, YOKE * 262 1-658-578-11 MOTOR (SLIDE) BOARD 4-977-954-01 PULLEY (SL) 4-982-447-01 SPRING (BU), COMPRESSION 4-977-953-01 GEAR (SL-A) 4-951-620-41 SCREW (2.6), +BVTP 4-977-955-01 GEAR (SL-B) * 265...
  • Page 67 (6) BASE UNIT SECTION (BU-5BD29AL) M101 M102 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark ! 301 8-820-020-01 OPTICAL PICK-UP KSS-213D/Q-NP 4-917-564-01 GEAR (P), FLATNESS 1-769-069-11 WIRE (FLAT TYPE) (16 CORE) * 307 A-4699-515-A BD BOARD, COMPLETE 4-917-567-01 GEAR (M) 4-951-620-01 SCREW (2.6X8), +BVTP 4-951-940-01 INSULATOR (BU)
  • Page 68 (7) TAPE MECHANISM DECK SECTION-1 (TCM-220WR2) (including r C) HP101 (including r A) not supplied not supplied not supplied HRPE101 (including r B) not supplied not supplied not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-908-560-01 SPRING, AZIMUTH ADJUSTMENT...
  • Page 69 (8) TAPE MECHANISM DECK SECTION-2 (TCM-220WR2) r C: MOTOR board supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-908-597-01 CAM (A) X-3370-171-1 FLYWHEEL (BR) ASSY 3-908-608-11 SCREW, STEP 3-908-600-01 LEVER (REV-B) X-3372-930-1 ARM (A) ASSY, FR * 416 1-650-669-11 LEAF SWITCH BOARD X-3370-169-1 FLYWHEEL (AR) ASSY...

  • Page 70: Electrical Parts List

    SECTION 8 AUDIO ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • Items marked “*” are not stocked since they The components identified by mark ! or dotted line with mark ! are are seldom required for routine service. parts list may be different from the parts speci- critical for safety.
  • Page 71 AUDIO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R311 1-247-881-00 CARBON 120K 1/4W C106 1-164-161-11 CERAMIC CHIP 0.0022uF 10% 100V R312 1-247-807-31 CARBON 1/4W R314 1-247-882-11 CARBON 130K 1/4W C107 1-164-161-11 CERAMIC CHIP 0.0022uF 10% 100V R315 1-247-850-11 CARBON...
  • Page 72 CD SW Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R133 1-216-061-00 METAL CHIP 3.3K 1/10W C189 1-163-235-11 CERAMIC CHIP 22PF R134 1-216-065-00 METAL CHIP 4.7K 1/10W R135 1-216-065-00 METAL CHIP 4.7K 1/10W < CONNECTOR > R136 1-216-073-00 METAL CHIP 1/10W...
  • Page 73 CD SW CONNECTOR DECO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < DIODE > S649 1-762-196-21 SWITCH, TACT (DISC 1) D626 8-719-056-13 DIODE SML79423C-TP15 S650 1-762-196-21 SWITCH, TACT (DISC 2) (DISC IN/PLAY: DISC 1) S651 1-762-196-21 SWITCH, TACT (DISC 3) D627 8-719-056-13 DIODE SML79423C-TP15...
  • Page 74 HP/MIC LEAF SWITCH MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-4392-351-A HP/MIC BOARD, COMPLETE 1-650-669-11 LEAF SWITCH BOARD *********************** ****************** < CAPACITOR > < CONNECTOR > C750 1-162-294-31 CERAMIC 0.001uF 10% * CN1001 1-568-854-11 SOCKET, CONNECTOR 11P C751 1-162-294-31 CERAMIC 0.001uF 10%...
  • Page 75 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C202 1-136-169-00 FILM 0.22uF C390 1-126-933-11 ELECT 100uF C203 1-130-493-00 MYLAR 0.068uF 5% C391 1-162-306-11 CERAMIC 0.01uF C204 1-130-493-00 MYLAR 0.068uF 5% C392 1-126-933-11 ELECT 100uF C205 1-130-486-00 MYLAR 0.018uF 10% C393...
  • Page 76 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark * CN102 1-568-836-11 SOCKET, CONNECTOR 17P IC391 8-749-923-04 IC TOTX178 * CN201 1-568-834-11 SOCKET, CONNECTOR 15P IC901 8-759-288-53 IC LA5617 * CN202 1-568-862-11 SOCKET, CONNECTOR 19P IC902 8-759-604-86 IC M5F7807L * CN203 1-568-946-11 PIN, CONNECTOR 8P...
  • Page 77 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < RESISTOR > R257 1-249-431-11 CARBON 1/4W R259 1-249-441-11 CARBON 100K 1/4W R121 1-249-424-11 CARBON 3.9K 1/4W R260 1-247-903-00 CARBON 1/4W R122 1-247-887-00 CARBON 220K 1/4W R262 1-249-419-11 CARBON 1.5K 1/4W...
  • Page 78 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R331 1-247-807-31 CARBON 1/4W R1501 1-249-435-11 CARBON 1/4W R332 1-247-807-31 CARBON 1/4W R333 1-247-807-31 CARBON 1/4W R1502 1-249-417-11 CARBON 1/4W R1503 1-249-426-11 CARBON 5.6K 1/4W R339 1-247-807-31 CARBON 1/4W R1504 1-247-840-00 CARBON...
  • Page 79 PANEL MOTOR MOTOR (SLIDE) MOTOR (TURN) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < IC > MOTOR BOARD IC701 8-759-633-65 IC M54641L ************ (Included in AUDIO BOARD, COMPLETE) < RESISTOR > < CAPACITOR > R706 1-249-411-11 CARBON 1/4W C651...
  • Page 80 PANEL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C642 1-130-489-00 MYLAR 0.033uF 5% < TRANSISTOR > C643 1-162-302-11 CERAMIC 0.0022uF 30% C644 1-124-464-11 ELECT 0.22uF Q601 8-729-118-00 TRANSISTOR 2SB1116-L C646 1-130-470-00 MYLAR 820PF Q602 8-729-118-00 TRANSISTOR 2SB1116-L Q603 8-729-119-78 TRANSISTOR 2SC403SP-51 C647...
  • Page 81 PANEL POWER AMP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark S604 1-762-196-21 SWITCH, TACT (TIMER SELECT) R645 1-249-419-11 CARBON 1.5K 1/4W S605 1-762-196-21 SWITCH, TACT (CLOCK TIMER SET) R646 1-249-401-11 CARBON 1/4W S606 1-762-196-21 SWITCH, TACT (DISPLAY/DEMO) R647 1-249-403-11 CARBON 1/4W...
  • Page 82 POWER AMP SENSOR TC SW Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R842 1-247-881-00 CARBON 120K 1/4W C814 1-162-306-11 CERAMIC 0.01uF R843 1-249-421-11 CARBON 2.2K 1/4W C841 1-126-925-11 ELECT 470uF R844 1-249-429-11 CARBON 1/4W C851 1-124-720-11 ELECT 4.7uF C852...
  • Page 83 TC SW Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R728 1-247-807-31 CARBON 1/4W R729 1-249-407-11 CARBON 1/4W 1-163-249-11 CHIP CERAMIC 82PF R730 1-249-407-11 CARBON 1/4W 1-163-141-00 CERAMIC CHIP 0.001uF 5% 1-163-031-11 CERAMIC 10000PF R731 1-249-409-11 CARBON 1/4W 1-163-235-11 CHIP CERAMIC 22PF...
  • Page 84 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-162-306-11 CERAMIC 0.01uF 1-162-306-11 CERAMIC 0.01uF < CONNECTOR > 1-126-967-11 ELECT 47uF * CN1 1-568-834-11 SOCKET, CONNECTOR 15P C120 1-163-105-00 CERAMIC CHIP 33PF (AEP, UK, G, AED) < DIODE > C1701 1-162-294-31 CERAMIC 0.001uF 10%...
  • Page 85 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < JUMPER RESISTOR > 1-249-417-11 CARBON 1/4W (EE, CIS) 1-249-413-11 CARBON 470 5% 1/4W 1-216-049-91 CHIP 1/10W (AEP, UK, G, AED) (AEP, UK, G, AED) 1-249-413-11 CARBON 470 5% 1/4W 1-249-417-11 CARBON 1/4W...
  • Page 86 TRANS Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1703 1-216-069-00 METAL CHIP 6.8K 1/10W < CONNECTOR > (EE, CIS) R1704 1-216-075-00 METAL CHIP 1/10W * CN901 1-564-522-11 PLUG, CONNECTOR 7P (EE, CIS) * CN902 1-564-518-11 PLUG, CONNECTOR 3P CN903 1-774-108-11 PIN, CONNECTOR (PC BOARD) R1705...
  • Page 87 Ref. No. Part No. Description Remark ************** HARDWARE LIST ************** 7-685-871-01 SCREW +BVTT 3X6 (S) 7-685-647-79 SCREW +BVTP 3X10 TYPE2 N-S 7-685-650-79 SCREW +BVTP 3X16 TYPE2 IT-3 7-685-646-79 SCREW +BVTP 3X8 TYPE2 N-S 7-621-775-10 SCREW +B 2.6X4 7-621-255-15 SCREW +P 2X3 7-685-533-19 SCREW +BTP 2.6X6 TYPE2 N-S 7-685-131-19 SCREW +BTP 2.6X4 TYPE2 N-S 7-685-862-09 SCREW +BVTT 2.6X6 (S)
  • Page 88 HCD-RX80 Sony Corporation 97C057553-1 Printed in Hungary © 1997. 3 9-960-882-11 Home A&V Products Company Published by Service and Safety Engineering Dept. (Shibaura) – 112 –...

Table of Contents