Motorola RFS6000 Configuration Manual
Motorola wireless switch view certified configuration guide
Hide thumbs
Also See for RFS6000:
- Reference manual (1004 pages) ,
- Brochure (8 pages) ,
- Reference manual (1054 pages)
Related Manuals for Motorola RFS6000
Summary of Contents for Motorola RFS6000
- Page 1 VIEW Certified Configuration Guide Motorola RFS6000 Wireless Switch May 2009 Edition 1725-36197-001 Version A...
-
Page 2: Trademark Information
Trademark Information Polycom® and the logo designs SpectraLink® LinkPlus Link NetLink Are trademarks and registered trademarks of Polycom, Inc. in the United States of America and various countries. All other trademarks used herein are the property of their respective owners. Patent Information The accompanying product is protected by one or more US and foreign patents and/or pending... -
Page 3: Certified Product Summary
The products listed below have been thoroughly tested in Polycom’s lab using the VIEW Certification Test Plan. This document details how to configure the RFS6000 Wireless Switch and the AP300 access point (AP) to best support SpectraLink 8020/8030 Wireless Telephones. -
Page 4: Network Topology
Configuration Guide Network Topology The following topology was used during VIEW Certification testing. PN: 1725-36197-001_A.doc... -
Page 5: Configuration Settings
The VIEW Certified firmware release can be obtained from Motorola’s Developer Zone at http://support.symbol.com/support/product/softwaredownloads.do. Upgrading the RFS6000 Wireless Switch to the new firmware can be done through the Web interface or through the command line interface (CLI). Place the image on the FTP server, TFTP server or through Compact Flash card, depending on the file transfer mechanism chosen. -
Page 6: Installing Firmware Through Web Interface
Installing firmware through the Web interface 1. Open the RFS6000 applet by entering the IP address of the wireless switch: 2. In the navigation pane under 3. In the the lower right of the page. 4. In the 5. At 6. - Page 7 Motorola: RFS 6000 Wireless Switch with AP300 9. In the navigation pane under , click Switch Configurations 10. Click the button to reboot the switch. Restart PN: 1725-36197-001_A.doc...
- Page 8 Configuration Guide Installing the AP license through the CLI For the RFS6000 to adopt AP300s, a license has to be installed. Obtain the license key and then install based on the following steps: RFS6000>en RFS6000#conf t RFS6000(config)#license AP <LICENSE_KEY> Installing the AP license through the Web interface 1.
-
Page 9: Radio Settings
RFS6000 (config-wireless)#radio 1 beacon-interval 100 RFS6000 (config-wireless)#radio 1 dtim-period 3 RFS6000 (config-wireless)#radio 1 bss 1 1 RFS6000 (config-wireless)#radio 1 speed 1 2 5p5 basic6 9 11 basic12 18 basic24 36 48 54 PN: 1725-36197-001_A.doc Motorola: RFS 6000 Wireless Switch with AP300... - Page 10 RFS6000 (config-wireless)#radio 2 beacon-interval 100 RFS6000 (config-wireless)#radio 2 dtim-period 3 RFS6000 (config-wireless)#radio 2 bss 1 1 RFS6000 (config-wireless)#radio 2 speed basic6 9 basic12 18 basic24 36 48 54 Channel selection You can specify the desired channel manually by using the following commands.
- Page 11 Configuring radio settings through the Web interface 1. Open the RFS6000 applet by entering the IP address of the wireless switch: 2. In the navigation pane under 3. In the 4. In the (same for 802.11a and 802.11bg). 5. Select the appropriate the SpectraLink Wireless Telephones: a.
- Page 12 7. Once the APs are adopted they should appear in the Radios 8. Select the appropriate radio ( Radio2 9. Click the 10. In the Desired Power screen in the tab. Configuration for 802.11b/g or Radio1 for 802.11a). button. Edit dialog box, select the Configuration settings from the drop-down lists.
- Page 13 11. Click the 12. In the Rate settings dialog box, set the desired Rates 13. Click the 14. In the PN: 1725-36197-001_A.doc Motorola: RFS 6000 Wireless Switch with AP300 button. Rate Settings . Click button. DTIM Periods dialog box, set each value to...
- Page 14 For configuring power and data rate settings facility’s RF site survey, designed for voice traffic, to determine if you have sufficient coverage to support all data rates. SpectraLink Wireless Telephones require the following minimum dBm reading to support the corresponding Radio Standard For additional details on RF deployment please see the Enterprise-Grade Wi-Fi Telephony...
- Page 15 RFS6000(config-wireless)#wlan 1 qos svp enable RFS6000(config-wireless)#wlan 1 qos classification low RFS6000(config-wireless)#wlan 1 encryption-type tkip RFS6000(config-wireless)#wlan 1 dot11i phrase 0 12345678 To configure WPA2-PSK replace the last two lines in the above command sequence with the following: RFS6000(config-wireless)#wlan 1 encryption-type ccmp RFS6000(config-wireless)#wlan 1 dot11i phrase 0 12345678 PN: 1725-36197-001_A.doc...
- Page 16 Configuring SSID, QoS and security settings through the Web interface 1. Open the RFS6000 applet by entering the IP address of the wireless switch: 2. In the navigation pane under 3. In the button. 4. After enabling WLAN1 click the http://192.168.2.103...
- Page 17 6. To configure QoS, select the prioritize voice packets as instructed by the SVP protocol. 7. Select all non-voice packets to get lower priority. PN: 1725-36197-001_A.doc Motorola: RFS 6000 Wireless Switch with AP300 Enable SVP from the drop-down list. This will cause Access Category field.
- Page 18 8. To configure security, in the WPA/WPA2-TKIP 9. Click the 10. In the 11. Click Encryption check box. button. The dialog box shown below will appear. Config section, enter 12345678 under Key Settings Configuration Guide section select the ASCII Passphrase PN: 1725-36197-001_A.doc...