hit counter script
Lenovo ideapad 100S-11IBR Hardware Maintenance Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Laptop
  5. ideapad 100S-11IBR
  6. Hardware maintenance manual

Lenovo ideapad 100S-11IBR Hardware Maintenance Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Lenovo ideapad
100S-11IBR
Hardware
Maintenance
Manual

Advertisement

Table of Contents
loading

Related Manuals for Lenovo ideapad 100S-11IBR

Summary of Contents for Lenovo ideapad 100S-11IBR

  • Page 1 Lenovo ideapad 100S-11IBR Hardware Maintenance Manual...
  • Page 2 Note: • Before using this information and the product it supports, be sure to read the general information under “Notices” on page 64. First Edition (Sep. 2016) © Copyright Lenovo 2016. All rights reserved. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925. © 2016 Lenovo...

  • Page 3: Table Of Contents

    Power-on password ..........24 Hard-disk password ..........24 Administrator password ........24 Power management ........25 Screen blank state ..........25 Putting the computer to sleep or shutting it down ..............25 Putting your computer to sleep ......25 Shutting down the computer ......25 Lenovo ideapad 100S-11IBR...... 26 Specifications ..........26 Status indicators ........... 28 Fn key combinations/Hotkeys....... 29 FRU replacement notices ......30 Screw notices ..........30 Removing and replacing an FRU ....31 1010 Base cover ..........32 1020 Battery pack ..........34 1030 IO board .

  • Page 4: About This Manual

    • The product-specific section includes service, reference, and product-specific parts information. Important: This manual is intended only for trained servicers who are familiar with Lenovo products. Use this manual to troubleshoot problems effectively. Before servicing a Lenovo product, make sure to read all the information under “Safety information” on page 1 and “Important service information” on page 16.

  • Page 5: Safety Information

    Safety information Safety information This chapter presents the following safety information that you need to get familiar with before you service a Lenovo ideapad 100S-11IBR computer: • “General safety” on page 2 • “Electrical safety” on page 3 • “Safety inspection guide” on page 5 • “Handling devices that are sensitive to electrostatic discharge” on page 6 • “Grounding requirements” on page 6 • “Safety notices: multilingual translations” on page 7 • “Laser compliance statement” on page 14...

  • Page 6: General Safety

    Lenovo ideapad 100S-11IBR Hardware Maintenance Manual General safety Follow these rules below to ensure general safety: • Observe a good housekeeping in the area where the machines are put during and after the maintenance. • When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3. Use a slow lifting force. Never move suddenly or twist when you attempt to lift it. 4. Lift it by standing or pushing up with your leg muscles; this action could avoid the strain from the muscles in your back. Do not attempt to lift any object that weighs more than 16 kg (35 lb) or that you think is too heavy for you. • Do not perform any action that causes hazards to the customer, or that makes the machine unsafe.

  • Page 7: Electrical Safety

    About this manual Electrical safety Observe the following rules when working on electrical equipments. Important: Use only approved tools and test equipments. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have rubber floor mats near their machines that contain small conductive fibers to decrease electrostatic discharges.
  • Page 8 Lenovo ideapad 100S-11IBR Hardware Maintenance Manual • Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. • Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage. • Do not service the following parts with the power on when they are removed from their normal operating places in a machine: – Power supply units – Pumps – Blowers and fans – Motor generators and similar units. (This practice ensures correct grounding of the units.) • If an electrical accident occurs: – Caution: do not become a victim yourself.

  • Page 9: Safety Inspection Guide

    The power cord should be the type specified in the parts list. c. Insulation must not be frayed or worn. 4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage. 8. Check for worn, frayed, or pinched cables.

  • Page 10: Handling Devices That Are Sensitive To Electrostatic Discharge

    Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge. Notes: 1. Use product-specific ESD procedures when they exceed the requirements noted here.

  • Page 11: Safety Notices: Multilingual Translations

    About this manual Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer. Verify this by shaking the computer and listening for rattling sounds.
  • Page 12 Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short- circuit it. Dispose of the battery as required by local ordinances or regulations.
  • Page 13 About this manual Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack.
  • Page 14 Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations.
  • Page 15 About this manual Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water at least for 15 minutes. Seek medical care if any symptoms caused by the fluid are present after washing. Si le panneau d’affichage à...
  • Page 16 Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation.
  • Page 17 About this manual Safety notice 8 DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface.

  • Page 18: Laser Compliance Statement

    Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Laser compliance statement Some models of Lenovo computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products. Elsewhere, the drive is certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN 60 825 for Class 1 laser products.
  • Page 19 About this manual A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe diretamente por meio de instrumentos óticos e evite exposição direta com o feixe de luz.

  • Page 20: Important Service Information

    Strategy for replacing FRUs Before replacing parts: Make sure that all software fixes, drivers, and BIOS downloads are installed before replacing any FRUs listed in this manual. After a system board is replaced, ensure that the latest BIOS is loaded to the system board before completing the service action. To download software fixes, drivers, and BIOS, follow the steps below: 1. Go to http://support.lenovo.com. 2. Enter the serial number or select a product or use Lenovo smart downloading. 3. Select the BIOS/Driver/Applications and download. 4. Follow the directions on the screen and install the necessary software.

  • Page 21: Strategy For Replacing A Hard Disk Drive

    Important service information Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: • If you are instructed to replace an FRU, but the replacement does not solve the problem, reinstall the original FRU before you continue. • Some computers have both a processor board and a system board. If you are instructed to replace either of them, and replacing one of them does not solve the problem, reinstall that board, and then replace the other one. • If an adapter or a device consists of more than one FRU, any of the FRUs may be the cause of the error. Before replacing the adapter or device, remove the FRUs one by one to see if the symptoms change. Replace only the FRU that changed the symptoms. Attention: The setup configuration on the computer you are servicing may have been customized. Running Automatic Configuration may alter the settings. Note the current configuration settings (using the View Configuration option); then, when service has been completed, verify that those settings remain in effect.

  • Page 22: Important Information About Replacing Rohs Compliant Frus

    Note: RoHS and non-RoHS FRU part numbers with the same fit and function are identified with unique FRU part numbers. Lenovo plans to transit to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo’s requirements and schedule in the EU. Products sold in 2005 and 2006 will contain some RoHS compliant FRUs. The following statement pertains to these products and any product Lenovo produces containing RoHS compliant FRUs.

  • Page 23: General Checkout

    General checkout General checkout This chapter presents the following information: • “What to do first” on page 20 • “Power system checkout” on page 21 Before you go to the checkout, make sure to read the following important notes: Important notes: • Only certified trained personnel can service the computer. • Before replacing any FRU, read the entire page on removing and replacing FRUs. • Carefully remove screws for reuse when replacing FRUs. • Be extremely careful during such write operations as copying, saving, or formatting. Drives in the computer that you are servicing sequence might have been altered.

  • Page 24: What To Do First

    Lenovo ideapad 100S-11IBR Hardware Maintenance Manual What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2. Date of service 3. Date on which the machine failed 4. Date of purchase 5. Procedure index and page number in which the failing FRU was detected 6. Failing FRU name and part number 7. Machine type, model number, and serial number 8. Customer’s name and address Note for warranty: During the warranty period, the customer may be responsible for repair costs if the computer damage was caused by misuse, accident, modification, unsuitable physical or operating environment, or improper maintenance by the customer.

  • Page 25: Power System Checkout

    • If the computer does not charge during operation, go to “Checking operational charging”. To check the AC adapter, follow the steps below: 1. Unplug the AC adapter cable from the computer. 2. Measure the output voltage at the plug of the AC adapter cable. See the following figure: Voltage (V DC) Note: Output voltage for the AC adapter pin No. 2 may differ from the one you are servicing. 3. If the voltage is not correct, replace the AC adapter. 4. If the voltage is acceptable, do the following: • Replace the system board. • If the problem persists, go to “Lenovo ideapad 100S-11IBR” on page 26. Note: Noise from the AC adapter does not always indicate a defect.

  • Page 26: Checking Operational Charging

    Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Checking operational charging To check whether the battery charges properly during operation, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer. Perform operational charging. If the battery status indicator or icon does not light on, remove the battery pack and let it return to room temperature. Reinstall the battery pack. If the charge indicator or icon is still off, replace the battery pack. If the charge indicator still does not light on, replace the system board. Then reinstall the battery pack. If it is still not charged, go to the next section. Checking the battery pack Battery charging does not start until the Power Meter shows that less than 95% of the total power remains; under this condition the battery pack can charge to...

  • Page 27: Related Service Information

    This chapter presents the following information: • “Restoring the factory contents by using Recovery system” on page 23 • “Passwords” on page 24 • “Power management” on page 25 Restoring the factory contents by using Recovery system Restore of factory default The Lenovo ideapad 100S-11IBR computers come with pre-installed Recovery system. In order to save application files and the initial backedup files of the system, the hard disk in a Lenovo computer includes a hidden partition when it is shipped. If you need to restore the system to the point of your first boot up, just enter the Recovery System (Push-button reset). For details of the Recovery system, see the User Guide for Recovery system . Note: This will delete all the new data on the system partition (C drive), which is not recoverable.

  • Page 28: Passwords

    Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Passwords As many as three passwords may be needed for any Lenovo computer: the power-on password (POP), the hard disk password (HDP), and the administrator password. If any of these passwords has been set, a prompt for it appears on the screen whenever the computer is turned on. The computer does not start until the password is entered.

  • Page 29: Power Management

    Related service information Power management Note: Power management modes are not supported for APM operating system. To reduce power consumption, the computer has three power management modes: screen blank, sleep (standby), and shut down. Screen blank state If the time set on the “Turn off monitor” timer in the operating system expires, the LCD backlight turns off. You can also turn off the LCD backlight by pressing To end screen blank state and resume normal operation, press any key. Putting the computer to sleep or shutting it down When you have finished working with your computer, you can put it to sleep or shut it down.

  • Page 30: Lenovo Ideapad 100S-11Ibr

    Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Lenovo ideapad 100S-11IBR This chapter presents the following product-specific service references and product-specific parts information: • “Specifications” on page 26 • “Status indicators” on page 28 • “Fn key combinations/Hotkeys” on page 29 • “FRU replacement notices” on page 30 • “Removing and replacing an FRU” on page 31 • “Locations” on page 54 • “Parts list” on page 56 Specifications The following table lists the specifications of the Lenovo ideapad 100S-11IBR: Table 1. Specifications Feature Description Processor • View the system properties of your computer. You can do this as...
  • Page 31 Lenovo ideapad 100S-11IBR Table 1. Specifications (continued) Feature Description Ethernet (on the • 802.11 A.C 1x1+BT 4.0 system board) Bluetooth • Combine with Wifi module wireless Keyboard • Internal, bottom assembly Integrated • 0.3 M camera Battery • Li-ion, 2 cells, 31.9 Wh AC adapter • 20 V, 45 W Pre-installed • Win 10 operating • Free Dos system...

  • Page 32: Status Indicators

    Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Status indicators The system status indicators below show the computer status: Table 2. Status indicators Indicator Symbol Indicator Meaning status The computer is powered on. (solid white) Power • The computer is in sleep mode. • The computer is powered off. The battery has between 20% and 100% charge. (solid white) Battery The battery has less than 20% charge. (solid amber) The battery is fully charged.

  • Page 33: Fn Key Combinations/Hotkeys

    Lenovo ideapad 100S-11IBR Fn key combinations/Hotkeys The following table shows the function of each combination of Fn with a function key. Table 3. Fn key combinations Fn + PgUp: Activates the home key function. Fn + PgDn: Activates the end key function. You can access certain system settings quickly by pressing the appropriate hotkeys.

  • Page 34: Fru Replacement Notices

    Lenovo ideapad 100S-11IBR Hardware Maintenance Manual FRU replacement notices This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo computer, this problem is addressed with special nylon-coated screws that have the following characteristics: • They maintain tight connections. • They do not easily come loose, even with shock or vibration.

  • Page 35: Removing And Replacing An Fru

    Lenovo ideapad 100S-11IBR Removing and replacing an FRU This section presents exploded figures with the instructions to indicate how to remove and replace the FRU. Make sure to observe the following general rules: 1. Do not attempt to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts. 2. Before replacing any FRU, review “FRU replacement notices” on page 30. 3. Begin by removing any FRUs that have to be removed before the failing FRU. Any of such FRUs are listed at the top of the page. Remove them in the order in which they are listed. 4. Follow the correct sequence in the steps to remove the FRU, as given in the figures by the numbers in square callouts. 5. When turning a screw to replace an FRU, turn it in the direction as given by the arrow in the figure. 6. When removing the FRU, move it in the direction as given by the arrow in the figure.

  • Page 36: 1010 Base Cover

    Lenovo ideapad 100S-11IBR Hardware Maintenance Manual 1010 Base cover Figure 1. Removal steps of base cover Remove the screws 1 from the bottom. Step Screw (quantity) Color Torque M2 × 3.5 mm, Phillips-head, nylok-coated (11) White 2.5±0.2Kgf Btm cover assy Use a plastic prying tool to aid in separation in the directions shown by arrows 2, 3, 4, and 5.
  • Page 37 Lenovo ideapad 100S-11IBR Note: Applying labels to the base cover If you see the following labels on the base cover, it needs to be peeled off from the old base cover, and put on the new base cover. Win10 home&pro label...

  • Page 38: 1020 Battery Pack

    Lenovo ideapad 100S-11IBR Hardware Maintenance Manual 1020 Battery pack For access, remove this FRU: • “1010 Base cover” on page 32 DANGER Only use the battery specified in the parts list for your computer. Any other battery could ignite or explode.

  • Page 39: 1030 Io Board

    Lenovo ideapad 100S-11IBR 1030 IO board For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 Figure 3. Removal steps of IO board Detach the IO board connector in the directions shown by arrows 1 and 2.

  • Page 40: 1040 Touchpad Button Board

    Lenovo ideapad 100S-11IBR Hardware Maintenance Manual 1040 Touchpad button board For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 Figure 4. Removal steps of touchpad button board Detach the connectors in the directions shown by arrows 1 and 2. Remove the screws 3.
  • Page 41 Lenovo ideapad 100S-11IBR Figure 4. Removal steps of touchpad button board (continued) Remove the touchpad button board 5. When installing: Make sure that the connectors are attached firmly.

  • Page 42: 1050 Speakers

    Lenovo ideapad 100S-11IBR Hardware Maintenance Manual 1050 Speakers For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 Figure 5. Removal steps of speakers Detach the speaker connector in the direction shown by arrow 1 and release the cable from the cable guide.

  • Page 43: 1060 Solid State Disk

    Lenovo ideapad 100S-11IBR 1060 Solid state disk For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 Figure 6. Removal steps of solid state disk Remove the screw 1.

  • Page 44: 1070 Pci Express Mini Card For Wireless Lan

    • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 Important: The preinstalled WLAN module may only be replaced with a Lenovo approved module in order to comply with FCC and IC regulations. Refer to “Overall” on page 57 for Lenovo part numbers for the approved modules.
  • Page 45 Lenovo ideapad 100S-11IBR Figure 7. Removal steps of PCI Express Mini Card for wireless LAN (continued) Disconnect the two wireless LAN cables 2, and then remove the screw 3. In step 2, unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159), or pick up the connectors with your fingers and gently unplug them in the direction shown by the arrows.
  • Page 46 Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Figure 7. Removal steps of PCI Express Mini Card for wireless LAN (continued) Remove the card in the direction shown by arrow 4. When installing: • In models with a wireless LAN card that has two antenna connectors, plug the black cable (1st) (MAIN) into the jack labeled MAIN, and the grey cable (2nd) (AUX) into the jack labeled AUX on the card.

  • Page 47: 1080 System Board

    Lenovo ideapad 100S-11IBR 1080 System board Important notices for handling the system board: When handling the system board, bear the following in mind. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite.
  • Page 48 Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Figure 8. Removal steps of system board (continued) Disconnect the keyboard connector and touchpad connector in the directions shown by arrows 2 and 3. Unplug the LCD connector in the direction shown by arrow 4.

  • Page 49: 1090 Upper Case

    Lenovo ideapad 100S-11IBR 1090 Upper case For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 • “1030 IO board” on page 35 • “1050 Speakers” on page 38 •...
  • Page 50 Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Figure 9. Removal steps of upper case (continued) Release the cables from the cable guide and open the hinge in the direction shown by arrows 2. Rotate the upper case in the direction shown by arrow 3. Then remove the...

  • Page 51: 1100 Lcd Unit

    Lenovo ideapad 100S-11IBR 1100 LCD unit For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 • “1030 IO board” on page 35 • “1050 Speakers” on page 38 •...
  • Page 52 Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Figure 10. Removal steps of LCD unit (continued) Remove the screws 2. Lift the LCD panel slightly 3. Disconnect the LCD connector in the directions shown by arrows 4 and 5. Then remove the LCD panel.

  • Page 53: 1110 Lcd Hinges

    Lenovo ideapad 100S-11IBR 1110 LCD hinges For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 • “1030 IO board” on page 35 • “1050 Speakers” on page 38 •...
  • Page 54 Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Figure 11. Removal steps of LCD hinges (continued) Remove the two hinge covers in the direction shown by arrows 2. Remove the screws 3 and 4. Step Screw (quantity) Color Torque M2 × 2.5 mm, Phillips-head, nylok-coated (6) Black 2.5±0.2Kgf...
  • Page 55 Lenovo ideapad 100S-11IBR Figure 11. Removal steps of LCD hinges (continued) Release the two hinges in the direction shown by arrows 5.

  • Page 56: 1120 Lcd Cable And Integrated Camera

    Lenovo ideapad 100S-11IBR Hardware Maintenance Manual 1120 LCD cable and integrated camera For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 • “1030 IO board” on page 35 • “1050 Speakers” on page 38 • “1060 Solid state disk” on page 39 • “1070 PCI Express Mini Card for wireless LAN” on page 40 • “1080 System board” on page 43 • “1090 Upper case” on page 45 • “1100 LCD unit” on page 47 • “1110 LCD hinges” on page 49 Figure 12. Removal steps of LCD cable and integrated camera Note: The integrated camera is stuck on the top center of the LCD cover.
  • Page 57 Lenovo ideapad 100S-11IBR Figure 12. Removal steps of LCD cable and integrated camera (continued) Remove the LCD cable in the direction shown by arrow 3.

  • Page 58: Locations

    Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Locations Front view and right-side view 1 Integrated camera 2 Built-in microphone (with noise reduction) 3 Wireless LAN antennas 4 Computer display 5 Novo button 6 System status indicators Note: For the description of each indicator, see “Status indicators” on page 28. 7 Power button 8 Touchpad 9 USB ports J Combo audio jack...

  • Page 59: Bottom And Left-Side View

    Lenovo ideapad 100S-11IBR Bottom and Left-side view 1 Speakers 2 Micro SD card slot 3 HDMI port 4 USB 3.0 port 5 AC power adapter jack...

  • Page 60: Parts List

    Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Parts list This section presents the following service parts: • “Overall” on page 57 • “LCD FRUs” on page 61 • “AC adapters” on page 63 • “Screws” on page 63 Note: Each FRU is available for all types or models, unless specific types or models are specified. Attention: Do not attempt to replace an FRU on your own. If an FRU is damaged, contact a Lenovo authorized servicer or a marketing representative for replacement or repair. Only qualified technicians can inspect or repair this product.

  • Page 61: Overall

    Lenovo ideapad 100S-11IBR Overall...
  • Page 62 Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Table 5. Parts list—Overall No. FRU FRU no. CRU ID. a-b See “Miscellaneous parts” on page 63.) LCD unit (see “LCD FRUs” on page 61.) Upper Case ASM 3N 80WG W/KB NOD WH 5CB0M53710 Upper Case ASM 3N 80WG W/KB GE WH 5CB0M53709 Upper Case ASM 3N 80WG W/KB TUR BK 5CB0M53662 Upper Case ASM 3N 80WG W/KB UK BK 5CB0M53659 Upper Case ASM 3N 80WG W/KB KOR WH 5CB0M53708 Upper Case ASM 3N 80WG W/KB BEL WH 5CB0M53644 Upper Case ASM 3N 80WG W/KB USI BK 5CB0M53660 Upper Case ASM 3N 80WG W/KB TC BK 5CB0M53610 Upper Case ASM 3N 80WG W/KB UKR BK 5CB0M75973 Upper Case ASM 3N 80WG W/KB DUT BK 5CB0M53707 Upper Case ASM 3N 80WG W/KB HEB BK...
  • Page 63 Lenovo ideapad 100S-11IBR Table 5. Parts list—Overall (continued) No. FRU FRU no. CRU ID. Upper Case ASM 3N 80WG W/KB GRE WH 5CB0M53645 Upper Case ASM 3N 80WG W/KB LSP BK 5CB0M53687 Upper Case ASM 3N 80WG W/KB DUT WH 5CB0M53653 Upper Case ASM 3N 80WG W/KB ID BK 5CB0M53605 Upper Case ASM 3N 80WG W/KB BEL BK 5CB0M53688 Upper Case ASM 3N 80WG W/KB US WH 5CB0M53650 Upper Case ASM 3N 80WG W/KB HUN BK 5CB0M53719 Upper Case ASM 3N 80WG W/KB JAP WH 5CB0M53720 Upper Case ASM 3N 80WG W/KB RU BK 5CB0M53590 Upper Case ASM 3N 80WG W/KB NOD BK 5CB0M53602 Up Case ASM 3N 80WG W/KB FR-AR WH 5CB0M53702 Up Case ASM 3N 80WG W/KB CF-EN WH 5CB0M53724 Upper Case ASM 3N 80WG W/KB FR WH 5CB0M53698...
  • Page 64 Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Table 5. Parts list—Overall (continued) No. FRU FRU no. CRU ID. Lower case 3N 80WG Red 5CB0M53677 Lower case 3N 80WG Blue 5CB0M53705 Lower case 3N 80WG White 5CB0M53589 — AC adapter (see “AC adapters” on page 63).

  • Page 65: Lcd Frus

    Lenovo ideapad 100S-11IBR LCD FRUs In Lenovo ideapad 100S-11IBR, there are following types of LCDs. • “11.6-in. HD LED”...
  • Page 66 Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Table 6. Parts list—LCD FRUs No. FRU FRU no. CRU ID. LCD Bezel 3N 80WG BLK 5B30M53686 LCD Bezel 3N 80WG WH 5B30M53611 INX N116BGE EA2 C2HD AG S NB 5D10H34460 IV M116NWR6 R0 HDT AG S NB 5D10K04184 BOE NT116WHM-N21 HD AG S NB 5D10H34773 Hinge Cover 3N 80WG Black 5CB0M67227 Hinge Cover 3N 80WG White 5CB0M67228 Hinge L+R 3N 80R2 5H50K38937 Lvds cable 3N 80WG 5C10M53622 CAM 3N80WG WIN10 0.3M Front W/mic 5C20M53635 LCD Cover 3N 80WG Blue 5CB0M67164 LCD Cover 3N 80WG Red...

  • Page 67: Miscellaneous Parts

    Lenovo ideapad 100S-11IBR Miscellaneous parts Table 7. Parts list—Miscellaneous parts CRU ID. System miscellaneous parts: • ( a ) TP Bracket 3N 80WG 5B40M53666 • ( b ) Rubber Foot 3N 80WG 5F40M53712 Note: Italicized letters in parentheses are references to the exploded view in “Overall” on page 57. AC adapters Table 8. Parts list—AC adapters FRU no. CRU ID. Chicony ADL45WCA 20V2.25A 5A10H43629 Chicony ADL45WCB 20V2.25A 5A10H43618 Chicony ADL45WCC 20V2.25A...

  • Page 68: Notices

    Lenovo ideapad 100S-11IBR Hardware Maintenance Manual Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the...

  • Page 69: Trademarks

    Notices Trademarks The following terms are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. Lenovo ideapad Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both. Other company, products, or service names may be trademarks or service marks of others.

Table of Contents